805721
62
Zoom out
Zoom in
Previous page
1/72
Next page
en
62
Installation Indications, functions and options MessagesCommissioningOperation and function
Tube collector function
OTC
Tube collector option
Adjustment range: OFF / ON
Factory setting: OFF
TCST
Tube collector function starting time
Adjustment range: 00:00 … 23:45
Factory setting: 07:00
This function is used for improving the switch-on behaviour in systems with
non-ideal sensor positions (e. g. with some tube collectors). This function operates
within an adjusted time frame. It activates the collector circuit pump for an adjust-
able runtime between adjustable standstill intervals in order to compensate for the
delayed temperature measurement.
If the runtime is set to more than 10 s, the pump will be run at 100 % for the rst
10 s of the runtime. For the remaining runtime, the pump will be run at the adjusted
minimum speed. If the collector sensor is defective or the collector is blocked, this
function is suppressed or switched off.
TCEN
Tube collector function ending time
Adjustment range: 00:00 … 23:45
Factory setting: 19:00
TCRU
Tube collector function runtime
Adjustment range: 5 … 500 s
Factory setting: 30 s
TCIN
Tube collector function standstill interval
Adjustment range: 1 60 min
Factory setting: 30 min
In system 7 both collectors are operated independently from each other by means
of this function. If the store is being loaded by one collector, the other one is nev-
ertheless operated.
Note
If the drainback option ODB is activated, TRCU will not be available. In
that case, the runtime will be determined by the parameters tFLL and
tSTB.
WARNING! Risk of injury! Risk of system damage by pressure surge!
If a drainback system is lled due to the tube collector function
and the heat transfer medium enters very hot collectors, pressure
surges can occur
ÎIf a pressure-less drainback system is used, TCST and
TCEN must be adjusted such that the system will not
be lled during times of potentially strong irradiation!
Heat quantity measurement
OHQM
Heat quantity measurement option
Adjustment range: OFF / ON
Factory setting: OFF
If OHQM is activated, the heat quantity gained can be calculated and displayed.
Heat quantity measurement with xed ow rate value
The heat quantity balancing (estimation) uses the difference between the ow and
return temperatures and the entered ow rate (at 100 % pump speed).
ÎRead the ow rate (l/min) and adjust it in the FMAX channel.
ÎAdjust the antifreeze type and concentration of the heat transfer uid in the
channels MEDT and MED%.
Note
Heat quantity measurement is not possible in systems with 2 solar pumps.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Sol Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Sol Plus in the language / languages: English as an attachment in your email.

The manual is 3.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Remeha Sol Plus

Remeha Sol Plus User Manual - German - 72 pages

Remeha Sol Plus User Manual - Dutch - 72 pages

Remeha Sol Plus User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info