815524

Quadra-Fire Classic Bay 1200 Pellet Manual

25
Zoom out
Zoom in
Previous page
1/40
Next page
25 7027-802M 04/23
A. Blowers
1. Exhaust Blower - PART NUMBER: 812-3381
Remove existing blower:
a. Use proper shut down procedures to shut down the
appliance and let it completely cool and then unplug
it.
b. Use an 11/32” wrench or nut driver to loosen and
remove the (6) nuts holding motor mount plate to the
blower housing on your appliance.
c. Remove washer from beneath the terminal ring on
the grounding wire.
d. Pull motor/mounting plate from blower housing.
e. Scrape o󰀨 old gasket material from blower housing.
Install new blower:
a. The blower and blower housing is shipped as an
assembly. It is necessary to separate them at this
point if you are using the existing blower housing
already installed on the appliance.
b. Follow steps 2 and 3 above. Discard or set aside the
new blower housing.
c. Carefully remove gasket from new housing and set
onto the blower housing.
Re-install blower to blower housing:
a. Install blower on housing ensuring that wiring exits
facing the 8 o’clock position. Place the washer
and then the grounding wire on nearest mounting
plate stud.
b. Use nuts removed in Step b of Remove existing
blower to secure blower to housing.
c. Re-connect wiring (use jumper wire if necessary). Re-
connect power supply.
Remove 2 Screws
Remove 4 Screws
Outside Air
Flex Hose
Convection Blower
Figure 25.2
5 5 Service Parts Replacement
2. Convection Blower - PART NUMBER: 812-3370
a. Use proper shut down procedures to shut down the
appliance and let it completely cool.
b. The convection blower is located at the bottom rear
of the appliance. If an outside air kit is also installed,
depending on your particular installation you may
or may not have to remove the outside air ange. If
you do, remove the 2 screws using a Phillips head
screwdriver. You do not need to remove the ex pipe
from the ange.
c. Remove the lower rear screen by removing the 4
screws securing the screen to the appliance.
d. The motor is mounted on a removable bracket.
Remove the 2 screws just above the motor and the
whole assembly will tilt down and pull out.
e. Disconnect the wires from the blower. The wires
coming from the wiring harness are white, red and
tan and the wires coming from the blower are black,
white and red. The white connects to white, the red to
red and black to the tan color wire.
CAUTION
Shock Risk.
• Do NOT remove grounding prong
from plug.
• Plug directly into properly grounded 3
prong receptacle.
• Route cord away from appliance.
• Do NOT route cord under or in front of appliance.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quadra-Fire Classic Bay 1200 Pellet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quadra-Fire Classic Bay 1200 Pellet in the language / languages: English as an attachment in your email.

The manual is 5.89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quadra-Fire Classic Bay 1200 Pellet

Quadra-Fire Classic Bay 1200 Pellet User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info