481030
11
Zoom out
Zoom in
Previous page
1/22
Next page
POWXQ5360 EN
Copyright © 2010 VARO P a g e | 11 www.varo.com
8.6.2 Rear extension table
Unscrew the screws (a) at the end of both extension tubes.
Install the rear extension table by sliding the tubes into the 2 holes (b) at the back of the
main table.
Replace the screws (a) back into the tubes to prevent you from pulling the rear extension
table too far out.
You can lock at the wanted position with the 2 locking knobs (c) at the bottom of the main
table.
8.7 Installing the miter gauge (fig 12)
Fig 12
Insert the guide rail (a)
of the miter gauge into
one of the guide grooves
(b) of the saw table
intended for this
purpose.
8.8 Adjusting the miter gauge (fig 13)
Fig 13
Loosen the locking handle (b) in order to allow the
miter body (c) to rotate freely. Position the miter
body at 90° so that the positive detent secures it in
position. Tighten the locking handle in order to
hold the miter body securely in position.
If the pointer (a) requires adjustment, loosen the
screw that is located under the pointer using a
screwdriver. Adjust the pointer to 90° on the scale,
and then tighten the adjusting screw firmly.
In order to change the angle of the miter gauge,
loosen the locking handle (b) and the rotate the
miter body to the desired angle, as indicated on
the scale. Tighten the locking handle in order to
hold the miter body securely in position.
a
b
b
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXQ5360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQ5360 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQ5360

Powerplus POWXQ5360 User Manual - German - 22 pages

Powerplus POWXQ5360 User Manual - Dutch - 23 pages

Powerplus POWXQ5360 User Manual - French - 21 pages

Powerplus POWXQ5360 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info