481030
9
Zoom out
Zoom in
Previous page
1/22
Next page
POWXQ5360 EN
Copyright © 2010 VARO P a g e | 9 www.varo.com
Fig 6
Place the open-ended blade wrench (f) on the flat of
the outer flange (c) in order to prevent the arbor from
turning while tightening.
Tighten the arbor nut by turning it clockwise using the
box-end blade wrench (g)
Verify that the saw blade, the arbor flange, and the nut are properly seated,
and that the arbor nut is tightened securely.
In order to avoid injury from an accidental start-up, verify that the power
switch is in the off” position, and that the power cord is not plugged into
the outlet.
8.4 Assembling the blade guard (fig 7, fig 8, fig 9)
Fig 7
Use the hand wheel to set the blade to the
maximum height and to set the tilt to 0° on
the bevel scale. Lock the blade with the
bevel locking knob.
After loosening the knob (c), press the
device (a), the splitter (b) should be at the
highest position.
Fig 8
Insert the blade guard assembly (d) into
the splitter bracket, as shown.
Using a straight edge (f), verify whether
the blade guard splitter (e) is aligned with
the saw blade (g), with the straight edge
lying between the teeth of the blade.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXQ5360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQ5360 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQ5360

Powerplus POWXQ5360 User Manual - German - 22 pages

Powerplus POWXQ5360 User Manual - Dutch - 23 pages

Powerplus POWXQ5360 User Manual - French - 21 pages

Powerplus POWXQ5360 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info