481030
8
Zoom out
Zoom in
Previous page
1/22
Next page
POWXQ5360 EN
Copyright © 2010 VARO P a g e | 8 www.varo.com
8.2 Auxiliary rip fence (fig. 2, fig 3)
Fig 2
When sawing narrow work pieces and for
bevel cuts, the auxiliary rip fence (a)
(aluminum) must be mounted to the rip fence.
Insert the profile rail (b) into the groove on
the short side of the auxiliary rip fence.
Position the profile rail (b) in front of the rip
fence in such a manner that the holes of
both parts are in alignment.
Insert the fastening knobs through the
lateral holes in the rip fence and tighten
them.
Fig 3
When sawing high, narrow work pieces, the
auxiliary rip fence (aluminum) must be
mounted directly to rip fence (d).
Fasten the auxiliary rip fence (a) with the 2
square nuts and the fastening knobs (c)
directly to the rip fence (d).
8.3 Installing the blade (fig 4, fig 5, fig 6)
Fig 4
Unscrew the 6 screws (a) in the table insert. Remove
the table insert by using your spanner to lift it.
Fig 5
Raise the saw blade arbor (e) to its maximum
height by turning the blade raising control handle
counter-clockwise. Remove the arbor nut (b) and
the outer flange (c) from the saw arbor.
Place the saw blade onto the arbor, with the teeth
of the blade pointing DOWN toward the front of the
saw.
Place the flange (c) and the arbor nut (b) onto the
arbor, and hand-tighten the nut. Verify that the saw
blade is firmly seated against the inner flange (d).
NOTE: Verify that the large, flat surfaces of the
flange and the nut face INWARD, toward the saw
blade.
a
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXQ5360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQ5360 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQ5360

Powerplus POWXQ5360 User Manual - German - 22 pages

Powerplus POWXQ5360 User Manual - Dutch - 23 pages

Powerplus POWXQ5360 User Manual - French - 21 pages

Powerplus POWXQ5360 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info