481030
12
Zoom out
Zoom in
Previous page
1/22
Next page
POWXQ5360 EN
Copyright © 2010 VARO P a g e | 12 www.varo.com
8.9 Installing the vacuum cleaner (fig 14)
Fig. 14
Please use the dust pipe to
attach the vacuum cleaner.
9 OPERATING THE MACHINE
For safety reasons, verify that the operator has read the section entitled general safety
guidelines for the table saw before operating this saw. Verify the following before every time
the table saw is used:
1. The blade is tight.
2. The bevel angle locking handle is locked.
3. If ripping, the rip fence locking knob is tight, and the fence is parallel to the miter gauge
groove and the blade.
4. If crosscutting, the miter gauge knob is tight.
5. The blade guard and splitter are in place, and are working properly.
6. Safety glasses are worn.
7. Failure to adhere to these safety rules will greatly increase the chances of injury.
Before using the table saw, polish the tabletop with an automotive polishing wax in order to
keep it clean, and to make it easier to slide the work piece.
There are two basic types of table saw cuts: ripping and crosscutting. Ripping refers to cutting
along the length of the grain and the work piece. Crosscutting refers to either cutting across
the width or across the grain of the work piece. This distinction may be hard to make with man
made materials. Therefore, cutting a piece of material to a different width is ripping, and
cutting across the short dimension is crosscutting. Neither operation can be performed safely
freehand: ripping requires the use of the rip fence, and crosscutting requires the use of the
miter gauge. Never use the rip fence and the miter gauge at the same time during the cutting
operation.
Do not use more than one rip fence or a combination of a miter gauge and a
rip fence at the same time during a cutting operation.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXQ5360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQ5360 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQ5360

Powerplus POWXQ5360 User Manual - German - 22 pages

Powerplus POWXQ5360 User Manual - Dutch - 23 pages

Powerplus POWXQ5360 User Manual - French - 21 pages

Powerplus POWXQ5360 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info