584558
11
Zoom out
Zoom in
Previous page
1/20
Next page
Automatic controlled recording from a
satellite receiver (RECORD LINK)
This function automatically starts recording on the switched-off
DVD/ VCR when a video signal is recognised through the
connected scart cable. If your satellite receiver has a
programming function, the recording will start automatically
(as long as the satellite receiver is switched on).
1 Use a scart cable to connect scart socket AV2 (DECODER) on
the DVD/ VCR to the corresponding scart socket on the
satellite receiver.
2 Switch on the TV. If required, select the programme number for
the DVD/ VCR.
3 Press DISC/VCR MENU.The main menu will appear.
4 Select “RECORD SET UP” with K/L and confirm with B.
5 Select “RECORD LINK” with K/L.
6 Select function “ON” with B.
7 To end, press STATUS/EXIT.
8 Insert a cassette.
9 Programme the satellite receiver
with the required information
(programme number of the TV
channel, start time, end time).
If necessary, please see the
operating instructions for your
satellite receiver.
10 Press TIMER SET.The DVD/ VCR is now ready to record.The
beginning and end of the recording is controlled via scart
socket AV2 (DECODER).
SELECT KL CHOOSE B
RECORD SPEED [SP]
DIRECT RECORD [OFF]
RECORD LINK [OFF]
END=EXIT
11
English
DIRECT RECORD
With DIRECT RECORD, you can record the right TV channel
in seconds even if your DVD/ VCR is switched off. If the
recording is started manually, the DVD/ VCR uses the current
TV channel set on the TV.You will find more information on
how to switch “DIRECT RECORD” on or off in the next
section. Make sure that your DVD/ VCR socket (AV1/TV) and
the TV are connected by a scart cable.
1 On the TV, select the programme number you want to make
the recording from.
2 Press RECORD I with the DVD/ VCR switched off.
3 Stop recording with STOP C.
How does DIRECT RECORD work?
The DVD/ VCR compares the TV channel selected on the TV with
its stored TV channels via the scart cable. If the same TV channel
is found, it switches the DVD/ VCR to the corresponding pro-
gramme number and starts recording. Please do not change the
TV channel on the TV during the search so as not to affect the
process.
Switching “DIRECT RECORD” on or off
1 Switch on the TV. If required, select the programme number for
the DVD/ VCR.
2 Press DISC/VCR MENU.The main menu will appear.
3 Select “RECORD SET UP” with K/L and confirm with B.
4 Select “DIRECT RECORD”, with
K/L. Select “OFF” (Direct Record
off) or “ON” (Direct Record on)
with B.
5 To end, press STATUS/EXIT.
6 Press STANDBY-ON
yy
.
SELECT KL CHOOSE B
RECORD SPEED [SP]
DIRECT RECORD [OFF]
RECORD LINK [OFF]
END=EXIT
Direct dubbing
Follow the steps below to copy a DVD or video disc to a
videotape.This will be possible only if the DVD is not copy
protected.
1 Put a videotape in the cassette compartment. Make sure the
tape’s record tab is intact and the tape is long enough to
record the disc.
2 Press VCR.
3 Select the recording speed.
Details are at Selecting the recording speed (SP or LP).
4 Put the DVD you want to copy in the disc tray.
5 Press DVD.
6 Press PLAY B.While disc is playing, press PAUSE k at the
point you wish to start recording.
7 Press DIRECT DUBBING to record.
Switching off “RECORD LINK”
To s witch off the function, select “OFF” with B.
Copying a video tape
You can make copies of video cassettes made by friends or
relatives for your own enjoyment.
WARNING:
Unauthorized recordings of copyrighted video
cassettes may be an infringement of copyright laws.
Connect the recording DVD/ VCR (this unit) and the playback
video recorder (another video recorder) by using scart socket
AV2 (DECODER) or front AUDIO/ VIDEO in jacks.
1 Insert a pre-recorded video cassette into the playback DVD/
VCR.
2 Insert a blank video cassette, or one you want to record over,
into the cassette compartment of this DVD/ VCR.
3 Select programme number AV2 or AV3 on this DVD/ VCR.
4 Press RECORD I on the front panel of this DVD/ VCR.
5 Begin playback of the tape in the playback DVD/ VCR.
6 To stop recording, press STOP C on this DVD/ VCR, then stop
playback of the tape in the playing DVD/ VCR.
Programme numbers of AV2 scart socket and front
AUDIO/ VIDEO in jacks
If you are using the scart socket AV2 (DECODER),
select programme number AV2 with 0.0.2.
If you are using the front AUDIO/ VIDEO in jacks,
select programme number AV3 with 0.0.3.
• For the best results during dubbing, use the DVD/ VCR’s front
panel controls whenever possible.The remote control might
affect the playback DVD/ VCR’s operation.
• If video or colour fades in and out, you may be copying a copy
guarded video tape.
To pause the recording: Press VCR, then PAUSE k.
To r esume recording: Press PAUSE k again.
To stop the recording: Press VCR, then STOP C.
VCR Manual Recording
H9720ED.qx3 04.4.16 10:43 AM Page 11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips DVP-620VR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips DVP-620VR in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips DVP-620VR

Philips DVP-620VR User Manual - German - 20 pages

Philips DVP-620VR User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info