584558
10
Zoom out
Zoom in
Previous page
1/20
Next page
Selecting the recording speed (SP or LP)
LP allows to double the recording duration on tape (for
example six hours instead of three hours on an E180 cassette).
1 Switch on the TV set. If required, select the programme
number for the DVD/VCR.
2 Press DISC/VCR MENU.The main
menu will appear.
3 Select “RECORD SETUP” using
K/L and confirm with B.
4
Select “RECORD SPEED” using
K/L.
5 Select the required recording speed
with B.
6 To end, press STATUS/EXIT.
“SP” / “LP” / “AUTO”
“SP”: Standard Play (normal recording speed) offers the usual
first-class picture quality.
“LP”: Long Play (half recording speed, double recording time).
6 hours can be recorded on a 3-hour cassette (E180)
with a somewhat reduced picture quality.
“AUTO”: AUTOmatic Long Play. If there is not enough space on
the tape to record a programmed recording in
standard speed, the recording is automatically done in
“LP” (Long Play). Otherwise, the recording speed will
be “SP” (Standard Play).
SELECT KL CHOOSE B
RECORD SPEED [SP]
DIRECT RECORD [OFF]
RECORD LINK [OFF]
END=EXIT
10
English
Searching for a tape position with picture
(scanning)
1 During playback, press
h
or
g
one or more times.
2 If you want to search in super high speed, press
h
or
g
once more. (This function will not operate for a cassette
recorded in SP mode in the NTSC standard.)
3 Press PLAY B to resume playback.
Still picture / slow motion
1 During playback, press PAUSE
k
to stop the tape and display a
still picture.
2 During playback, press SLOW to playback the tape in slow
motion.
3 Press PLAY B to resume playback.
Scanning and still/slow motion interferes with the picture
quality.The sound is switched off.This is not a fault in your
DVD/ VCR.
Index search
Every time a tape is recorded an index marking is written on
the tape.These marked positions can be found again quickly
and easily later.
1 To search for the previous marking, press INDEX 3 and then
h
. ‘Fr’ will appear on the display for 5 seconds, and then, the
remaining tape time will appear.
2 For the next marking, press INDEX 3 and then
g
.‘FF’ will
appear on the display for 5 seconds, and then, the remaining
tape time will appear.
3 As soon as the DVD/ VCR finds this marking, it automatically
switches to playback.
Manual Tracking
To manually adjust the tracking during playback and slow
motion playback, press P+/P
-
.
Tracking will return to Automatic Tracking Adjustment when
you press STOP C, insert a tape, or press PLAY B.
To r emove vertical jitter in a Still picture, press P+/P
-
.
General information
Use Manual Recording to make a spontaneous recording
(for example, a programme currently being shown).
If you want to start and stop a recording manually, read the
section Recording without automatic switch-off.
Read the section DIRECT RECORD if you want to record a
programme currently being shown.
Read the section Automatic controlled recording from a
satellite receiver (RECORD LINK), if you want a
recording to be controlled automatically by a satellite receiver.
Recording without automatic switch-off
1 Insert a cassette.
2 Use P+/P
-
to select the programme number you want to
record, for example,‘P01’.
3 To start recording, press RECORD I.
4 Stop recording with STOP C.
Lining up recordings (assemble cut)
When you add a further recording to a cassette, which already
has a recording on it, a short blank (flicker) can appear between
the old and the new recording or the picture itself can flicker.
To help reduce these from occurring, proceed as follows:
1 Find the tape position of the old recording where you want to
insert the new recording.
2 Look at the last minute of the old recording (playback).
3 Press PAUSE
k
at the tape position where the new recording
is to go and press RECORD I.
4 Now start recording as usual by pressing RECORD I on the
remote control.
5 Stop recording with STOP C.
Searching for tape position without picture
(forward wind and rewind)
1 Stop the tape with STOP C.
2 Press
h
or
g
.‘Fr’ or ‘FF’ will appear on the display for 5
seconds, and then, the remaining tape time will appear.
3 To stop the tape, press STOP C.
“PROTECTED CASSETTE CANNOT RECORD”
message briefly appeared in the TV screen, then the
cassette was ejected.
A cassette without its security tab was inserted.
Undo the erase protection.
VCR Playback VCR Manual Recording
H9720ED.qx3 04.4.16 10:43 AM Page 10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips DVP-620VR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips DVP-620VR in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips DVP-620VR

Philips DVP-620VR User Manual - German - 20 pages

Philips DVP-620VR User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info