Manual Philips DVP-620VR (page 8 of 20) (English)

584558

Zoom out

Zoom in

1/20

Follow TV (Automatic TV channels sorting)

When the automatic channel search function is activated, the

TV channels are saved in a specific order. This may vary from

the order of TV channels on the TV. This function changes the

order of TV channels saved in the DVD/VCR to match that of

the TV. Make sure that the DVD/ VCR and the TV are

connected by a scart cable.

1 Press VCR, then DISC/VCR MENU.

2 Press K/L to select “TUNER SET

UP”, then press B.

3 Press K/L to select “FOLLOW

TV”, then press B.

4 “P:01” will appear in the DVD/

VCR display.

English

5 Select programme number “1” on the TV.

6 Confirm with B on the DVD/VCR remote control.The DVD/

VCR compares the TV channels on the TV and the DVD/VCR.

If the DVD/VCR finds the same TV channel as on the TV, then

it stores it at “P01”.

7 Wait until the next number, e.g. ‘P:02’ appears in the display.

8 Select the next programme number on the TV, e.g. “2”.

9 Confirm with B.

10 Repeat steps 7 to 9 until you have assigned a programme

number to all TV channels.

11 To end, press STATUS/EXIT.

Sorting TV channels manually

After you have performed the automatic channel search you

may not agree with the sequence in which the individual TV

channels have been allocated to the programme positions

(programme numbers) of the DVD/VCR.You can use this

function to individually sort the TV channels already saved.

1 Press VCR, then DISC/VCR MENU.

2 Press K/L to select “TUNER SET

UP”, then press B.

3 Press K/L to select “MOVE”, then

press B.

4 Press K/L to select the saved TV

channel that you want to change.

5 Confirm with B.

6 Move the selected channel with K/L to the programme

number you want to assign.

7 Confirm with B.

8 To assign other TV channels to a programme number, repeat

steps 4 to 7.

9 Confirm the assignment of the TV channel with MOVE menu.

10 To exit the MOVE menu, press STATUS/EXIT.

The clock resets automatically

If you save a TV channel that transmits VPS/PDC or the Teletexte on

programme number “P01”, date and time will constantly be updated.

As a result, time changes, i.e. daylight savings time, will be set

automatically.

MOVE

→ P01: 02 P06: 90

P02: 03 P07: 99

P03: 05 P08: 121

P04: 10 P09: 124

P05: 74 P10: 130

SELECT

KL CHOOSE B

END=EXIT

Setting the clock

If the display shows an incorrect time or “ --:-- ”, the time and

date must be reset manually.

If a TV channel that transmits VPS/PDC or the Teletexte is

stored under programme number “P01”, time/date will

automatically be taken from VPS/PDC or the Teletexte

information. (SMART CLOCK)

1 Press VCR, then DISC/VCR MENU.

2 Press K/L to select “INITIAL SET

UP”, then press B.

3 Press K/L to select “CLOCK”,

then press B.

Setting the language

You can change the language for the TV screen menu. However,

the DVD/VCR display will only display English text regardless

of this setting.

1 Press VCR, then DISC/VCR MENU.

2 Press K/L to select “INITIAL SET

UP”, then press B.

3 Press K/L to select “LANGUAGE”,

then press B.

4 Select the desired language with

K/L.

5 To end, press STATUS/EXIT.

SELECT KL

→ ENGLISH

FRANÇAIS

ESPAÑOL

DEUTSCH

ITALIANO

SVENSKA

NEDERLANDS

END=EXIT

Setting Up your DVD/ VCR

Automatic Channel Setup

You can programme the tuner to scan only the channels that

you can receive in your area.

1 Turn on the TV and select the video out channel on your TV.

2 Press VCR, then DISC/VCR MENU.

3 Press K/L to select “TUNER SET UP”, then press B.

4 Press K/L to select

“AUTO TUNING”, then press B.

• The tuner scans and memorises

all the active channels in your

area. After scanning, the tuner

stops on the lowest memorised

channel.

5 Press P +/

–

or numerical key pads

to scan through channels you have received.

Manual Channel Preset

1 Press VCR, then DISC/VCR MENU.

2 Press K/L to select “TUNER SET UP”, then press B.

3 Press K/L to select “MANUAL

TUNING”, then press B.

4 Press K/L to select “PROG.”, then

press B.

5 Press K/L or numerical key pads

to select your desired programme

number, then press B.

• You can select programme number 01-99.

Press

K/L

to select “CHANNEL”, then press

7 Press K/L.The DVD/VCR tuner will begin to search up or

down automatically.When a channel is found, the DVD/VCR

will stop searching and the picture will appear on the TV

Screen.

• You can select desired channel number by using numerical

key pads. Press three digits to select the channel number.

(To select channel 24, first press 0 button then press 2 and 4.)

• If this is the channel you want, press B.

• If you want to remove scrambled signals, press K/L to select

“DECODER”.Then, press B to select “ON”.

8 Press STATUS/EXIT to exit.

Notes:

– To confirm that a channel has been added, press the

P +/

–

buttons.

– You should select the satellite channels to be received by

the satellite receiver directly on the receiver itself.

MANUAL TUNING

→ PROG. P55

CHANNEL 055

DECODER [OFF]

SKIP [OFF]

SET=

KL OR 0 – 9

END=EXIT

PLEASE WAIT

START FINISH

❚❚❚❚❚❚❚❚❚❚❚❚

SELECT KL CHOOSE B

AUTO TUNING

MANUAL TUNING

→ FOLLOW TV

MOVE

END=EXIT

TIME --:--

DATE --/--/--

SMART CLOCK [ON]

END=EXIT

I cannot switch my TV to programme number “1”

If you have connected additional devices to socket

AV2(DECODER), please disconnect these devices. Because of

other connected devices, the TV could switch to the programme

number of the scart socket.

“NO TV SIGNALS” appears in the TV screen.

The DVD/ VCR is not receiving a video signal from the TV.

Check the plug on the scart cable.

Check your TV's operating instructions to see which scart socket

is used for video signals.

If this does not help, it's not possible to use this function. Please

read the section Sorting TV channels manually.

H9720ED.qx3 04.4.16 10:43 AM Page 8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips DVP-620VR in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips DVP-620VR

Philips DVP-620VR User Manual - German - 20 pages

Philips DVP-620VR User Manual - Dutch - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips DVP-620VR Manual

Product: