584558
12
Zoom out
Zoom in
Previous page
1/20
Next page
6 When all inputs are correct, press STATUS/EXIT.
The programming information is stored in a Timer block.
7 Insert a cassette with an intact security tab (unprotected).
8 Press TIMER SET.
REC’ will light up on the DVD/ VCR.
OTR (One Touch Recording)
This function enables you to set a recording length simply by
pressing RECORD I.
1 Follow steps 1 to 2 in Recording without automatic
switch-off section.
2 Press RECORD I repeatedly until the desired recording
length appears in the upper left corner of the TV screen.
• Recording stops when 0:00 is reached.
To check time remaining during an OTR
Press DISPLAY.
To change the recording length during an OTR
Press RECORD I repeatedly until the desired length appears.
To stop an OTR before recording is finished
Press STOP C.
To cancel the OTR but continue recording
Press RECORD I repeatedly until “REC” appears in the upper
left corner of the TV screen.
General information
Use a TIMER programming to automatically start and stop a
recording at a later time or date.The DVD/ VCR will switch to
the right programme number and begin recording at the
correct time.With this DVD/ VCR, you can pre-programme up
to eight recordings within a period of one year.To make a
programmed recording, your DVD/ VCR needs to know:
* the date you want to make the recording
* the programme number of the TV channel
* the start and stop time of the recording
* VPS or PDC on or off
This information is saved in a TIMER block.
12
English
What is “VPS/PDC”?
“VPS” (Video Programming System)/ “PDC” (Programme Delivery
Control) are used to control the start and duration of TV channel
recordings. If a TV programme starts earlier or ends later than
scheduled, the DVD/ VCR will turn on and off at the correct time.
What do I need to know about “VPS/PDC”?
Usually the VPS or PDC time is the same as the start time. But if
your TV guide shows a VPS or PDC time which is different from
the programme’s scheduled start time, e.g. 20.10 (VPS/PDC
20.14), you must enter the VPS/PDC time exact to the minute. If
you want a start time different from the VPS/PDC time, you must
switch VPS/PDC off.
Programming a recording
(with the “SHOWVIEW
TM
system”)
You no longer need to tediously enter the date, programme
number, start and end time.All the information needed for
programming is contained in the SHOWVIEW-programming
number.
You can find this SHOWVIEW number in most TV listing
magazines written next to the concerned programme.
1 Press SV/V+.
2 Enter the entire SHOWVIEW
number. This number is up to 9
digits long and can be found next
to the start time of the TV
programme in your TV listing magazine.
[e.g: 1-234-5 or 1 234 5]
If you make a mistake, you can clear your input with CLEAR.
3 Press SV/V+.
4 Select “ONCE”,“DAILY”, or “WEEKLY” recording with K/L.
Then press B.
5 The decoded data appears after confirmation.You can go back
to change the data. Select the corresponding input field using
B or CLEAR. Change the data with numerical key pads.
TM
ShowView system
ShowView No.
12345
– – – –
SET=SV/V+
CORRECT=CLEAR
END=EXIT
ShowView system
ONCE
DAILY
WEEKLY
SELECT
KL CHOOSE B
END=EXIT
“- -” appears at PROG.
The programme number of the TV channel has not yet been
assigned to the SHOWVIEW number. Using numerical key pads,
select the corresponding programme number (name) of the TV
channel.
The following message appears on the screen:“ERROR”
• The entered SHOWVIEW number is incorrect. Correct your input
or end with STATUS/EXIT.
• Check the time/date (see chapter 'Installing your video', section
'Setting the time and date').
A daily recording was entered for the wrong day. Daily
programming can only be used for recordings to be made from
Monday to Friday.
Switching on “VPS/PDC”
• Select “VPS/PDC” using B or CLEAR. Press 1 to switch off
“VPS/PDC” or press 2 to switch on “VPS/PDC”.
The following message appears on the screen:“TIMER
NOT COMPLETED”
The channel is wrong.
Programming a recording
(without the SHOWVIEW system)
1 Press VCR, then DISC/VCR MENU.
2 Select “TIMER” with K/L.Then
press B.
3 Select “ONCE”,“DAILY”, or
“WEEKLY” recording with K/L.
Then press B.
If all Timer blocks are in use,“FULL
will appear on the OSD.
4 Select the desired Timer block with
numerical key pads. (The flashing number indicates an empty
TIMER block.)
5 Enter the Start time (START) End time (STOP), Programme
number (PROG.),VPS/PDC information and the Date with
numerical key pads.
6 When all inputs are correct, press STATUS/EXIT.
The programming information is stored in a TIMER block.
7 Insert a cassette with an intact security tab (unprotected).
8 Press TIMER SET.
SELECT KL CHOOSE B
ONCE
DAILY
WEEKLY
TIMER LIST
END=EXIT
Error message: “FULL
• If this error message appears after
pressing SV/V+, then all TIMER
blocks are already programmed.
No more recordings can be pro-
grammed. If you want to clear a
programmed recording (TIMER
block), select the programme
number on TIMER LIST menu and
press CLEAR.
Selecting ONCE/ DAILY/ WEEKLY recordings
“ONCE”: Recording once
“DAILY”: Repeated daily recordings
(Monday to Friday)
“WEEKLY”: Repeated weekly recordings
(every week on the same day)
Programme numbers of the “AV1”,“AV2” scart socket
and “AV3” (front AUDIO/ VIDEO in jacks)
You can also programme recordings from external sources via
scart socket AV1(TV),AV2 (DECODER) or AV3 (front AUDIO/
VIDEO in jacks). Select programme number “AV1” with 0.0.1,
“AV2” with 0.0.2 or “AV3” with 0.0.3.
Programming a Recording (TIMER)
H9720ED.qx3 04.4.16 10:43 AM Page 12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips DVP-620VR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips DVP-620VR in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips DVP-620VR

Philips DVP-620VR User Manual - German - 20 pages

Philips DVP-620VR User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info