Manual Philips DVP-620VR (page 13 of 20) (English)

584558

Zoom out

Zoom in

1/20

English

Other Functions

How to check, or delete a programmed

recording (TIMER)

1 Press VCR, then DISC/VCR MENU.

2 Press K/L to select “TIMER”, then

press B.

3 Press K/L to select “TIMER LIST”,

then press B.

4 Select timer block with B.

5 To cancel the recording, press CLEAR.

6 To end, press STATUS/EXIT.

7 Press TIMER SET.

SELECT KL CHOOSE B

ONCE

DAILY

WEEKLY

→ TIMER LIST

END=EXIT

How to change a programmed recording

(TIMER)

1 Press VCR, then DISC/VCR MENU.

2 Press K/L to select “TIMER”, then

press B.

3 Press K/L to select “ONCE”,

“DAILY”, or “WEEKLY” recording

with K/L, then press B.

4 Select a TIMER block with

numerical key pads. (The flashing

number indicates an empty TIMER block.)

5 Press CLEAR to delete information and input correct

information with numerical key pads.

6 To end, press STATUS/EXIT.

7 Press TIMER SET.

ONCE

TIMER - 1 2 3 4 5 6 7 8 -

SELECT TIMER NUMBER

END=EXIT

Hint for Timer Recording

• If there is a power failure or the DVD/VCR is unplugged for

more than 1 minute, the clock setting and all timer settings

will be lost.

• If a tape ends during TIMER RECORDING, the DVD/VCR will

stop, eject the tape, and switch to the DVD mode

automatically as ‘ ’ blinks. (If the DVD power is off,

the DVD/VCR will become the STANDBY status).

• If a tape is not in the DVD/VCR or does not have a record

tab, ‘ ’ flashes and timer recording will not operate. Please

insert a recordable tape.

• When timer recordings are set, ‘ ’ will come on.To use the

DVD/VCR as usual until the time

for the recording, press TIMER SET so that ‘ ’ disappears.

Press VCR to choose VCR mode, then continue with the

other features as described in this manual.

Note:

- When all the programmed recording are finished, ‘’

will flash.

This is not a malfunction.

To use the DVD/VCR, press TIMER SET to turn off ‘’.

When the recording has been programmed in VCR mode,

“PRESS TIMER SET BUTTON FOR TIMER RECORDING”

appears on the screen.

* Press TIMER SET button to start the programming.

Error message:“FULL”

• If this error message appears after you select “ONCE”,“DAILY”,

or “WEEKLY” on TIMER menu and press B, then all TIMER

blocks are already programmed. No more recordings can be

programmed. If you want to clear or check a programmed

recording (TIMER block), select the programme number on

TIMER LIST menu and press CLEAR.

Switching the status display off or on

Along with the on screen menu, the status display also displays

information on the current operating status (counter, playback,

recording,TV channel, etc.) on the TV screen.You can switch

off the information about the operating status so that the

status display is not recorded when copying videocassettes.

Which settings can I choose?

“ON”: Shows the status display for a few seconds only.

“OFF”: Switches off the status display.

Blue Background on or off

If you want the TV screen to be solid blue when a weak signal is

received, set “BLUE BACKGROUND” to “ON”. The screen will

be blue and the sound will be muted. Or, if you want to receive

the weak signal, set “BLUE BACKGROUND” to “OFF”.

1 Press VCR, then DISC/VCR MENU.

2 Press K/L to select “VCR SET UP”,

then press B.

3 Press K/L to select “BLUE

BACKGROUND”, then press B.

4 Select “OFF” (no blue background)

or “ON” (blue background on)

with B.

5 To end, press STATUS/EXIT.

SELECT KL CHOOSE B

STATUS DISPLAY [ON]

→

BLUE BACKGROUND

[ON]

CLOCK DISPLAY [ON]

END=EXIT

Clock Display

This function allows you to switch the DVD/VCR display off.

It is useful in case you feel disturbed by the display-brightness

while watching TV in a dark room. It also reduces the power

consumption.

1 Press VCR, then DISC/VCR MENU.

2 Press K/L to select “VCR SET UP”,

then press B.

3 Press K/L to select “CLOCK

DISPLAY”, then press B.

4 Select “OFF” (no clock display) or

“ON” (clock display on) with B.

5 To end, press STATUS/EXIT.

SELECT KL CHOOSE B

STATUS DISPLAY [ON]

BLUE BACKGROUND

[ON]

→ CLOCK DISPLAY [ON]

END=EXIT

•

Reception of stereo broadcasts:

STEREO

LEFT

RIGHT

NONE

Display on

the TV screen

Mode

Stereo

Monaural

L Audio

R Audio

L Audio

R Audio

+R Audio

L+R Audio

AUDIO OUTPUT

• During playback of the recorded tape in Hi-Fi mode:

Mode

Stereo

Monaural

MIX

STEREO

LEFT

RIGHT

MONO

MIXED

Display on

the TV screen

Hi Fi L Audio

Hi Fi R Audio

Hi Fi L Audio

Hi Fi R Audio

Normal Audio

Hi Fi L Audio

Normal Audio

Hi Fi R Audio

Normal Audio

AUDIO OUTPUT

Selecting the sound channel

You can select the desired sound channel during playback or

while receiving TV channels via the DVD/ VCR.This allows you

to select a desired language for multi-language transmissions.

1 Press AUDIO.This will show the current sound setting.

2 Press AUDIO repeatedly until the desired setting appears in

the display.

•

During reception of bilingual broadcasts:

Display on

the TV screen

Mode

MAIN

SUB

MAIN

SUB

MAIN

SUB

MAIN

SUB

Main Audio

Sub Audio

Main Audio

Sub Audio

AUDIO OUTPUT

Timer block disappeared when I pressed B.

You have checked all the programmed recordings. If you want to

check them again, repeat steps 1 to 4.

1 Press VCR, then DISC/VCR MENU.

2 Press K/L to select “VCR SET UP”,

then press

3 Press K/L to select “STATUS

DISPLAY”, then press B.

4 Press K/L to select “ON” or

“OFF”, then press

5 To end, press STATUS/EXIT.

SELECT KL CHOOSE B

→STATUS DISPLAY [ON]

BLUE BACKGROUND

[ON]

CLOCK DISPLAY [ON]

END=EXIT

Programming a Recording (TIMER)

H9720ED.qx3 04.4.16 10:43 AM Page 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips DVP-620VR in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips DVP-620VR

Philips DVP-620VR User Manual - German - 20 pages

Philips DVP-620VR User Manual - Dutch - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips DVP-620VR Manual

Product: