819505

Parkside PMRA 20-Li B2 - IAN 462730 Robot Manual

53
Zoom out
Zoom in
Previous page
1/388
Next page
GB MT
53
7. Conrm the selection with the OK but-
ton (7).
8. Select the desired operating time with
the arrow buttons.
You set the operating time in full
hours per day.
9 Conrm the selection with the OK but-
ton (7).
10. Return to the main menu with the back
button (5).
When the set operating time per
day is reached, the lawn mower au-
tomatically returns to the charging station.
An extension of the operating time during
rain breaks can be set directly via the lawn
mower, see section “Setting the rain sen-
sor” or via the Parkside App: Settings
> Rain Sensor.
Setting secondary areas
In highly angular gardens, the area output
can be improved,
by setting secondary starting points. In this
case, several starting points can be select-
ed on the perimeter wire.
This allows the robotic mower to reach
areas of your garden that are difcult to
access.
The robotic mower will travel the selected
distance along the boundary wire and start
mowing in this area.
You can freely choose 5 further starting
points. To do this, measure the distance be-
tween the charging station and the starting
point clockwise along the perimeter wire.
You use the frequency in percent to deter-
mine how often the robotic mower starts its
work from the charging station or from the
respective starting points. The mowing pro-
cedure is still chaotic in this mode.
The secondary starting points are automat-
ically approached during operating hours
and according to schedule.
1. If necessary, open the cover (1).
2. Unlock the display (10) with the 4-digit
PIN.
3. Press the OK button (7) to enter the
main menu.
4. Use the arrow buttons (6) to select
“Secondary areas”.
5. Press the OK button to select a second-
ary range (Areas). Select the starting
distance “Distance (dst)m” and the
ratio “Percent (pct)%” of the area to be
mowed with the arrow buttons (6) and
press the OK button to conrm. After
the selection, you automatically return
to the overview of the secondary areas.
6. Repeat step 5 to complete the setting of
each secondary area (Areas).
7. Press the OK button (7) to conrm the
result of the setting.
The lawn mower travels the distance
“Distance (dst) m” specied by you
along the boundary wire (1 - 500 metres)
and then starts mowing.
You can specify the frequency under
“Percent (pct)%” to determine how
often the robotic mower starts its work from
the charging station or from the respective
starting points.
The sum of the “Percent (pct)%” indication
of the 5 secondary ranges (Areas) must be
less than/equal to 100 %.
Spot mode / xed point
mowing
This function allows you to mow lawns that
are otherwise covered by seating furniture,
playground equipment or similar.
… 53 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMRA 20-Li B2 - IAN 462730 Robot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMRA 20-Li B2 - IAN 462730 Robot in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info