819505

Parkside PMRA 20-Li B2 - IAN 462730 Robot Manual

52
Zoom out
Zoom in
Previous page
1/388
Next page
GB MT
52
The correct date and time setting is
required to ensure the correct func-
tion of the operating time settings.
4. Press the OK button (7) to enter the
main menu.
The lawn mower is now in standby
mode.
Changing the PIN
1. If necessary, open the cover (1).
2. Unlock the display (10) with the 4-digit
PIN.
3. Press the OK button (7) to enter the
main menu.
4. Use the arrow buttons (6) to select “Set-
tings”.
5. Conrm the selection with the OK but-
ton (7).
6. Use the arrow buttons (6) to select
“Change PIN”.
7. Conrm the selection with the OK but-
ton (7).
8. Enter the old 4-digit PIN. If you have
entered the PIN incorrectly, use the back
button (5) to return to the PIN entry.
9. Now enter a new PIN.
10. Conrm the new PIN by entering it
again. If you have entered the PIN
incorrectly, return to the PIN entry with
the back button (5) and repeat steps 8
and 9.
11. You can recognise a successful change
when “Successful!” appears on the dis-
play (10). Return to the main menu with
the back button (5).
Setting/deleting a schedule
Setting a schedule
1. If necessary, open the cover (1).
2. Unlock the display (10) with the 4-digit
PIN.
3. Press the OK button (7) to enter the
main menu.
4. Use the arrow buttons (6) to select
“Schedule”.
5. Select the day you want to set (Mon,
Tue, Wed, Thu, Fri, Sat, Sun) with the
arrow buttons (6).
6. Press the OK button to enter the day
setting.
7. Select the start and end time with the
arrow buttons (6).
Two mowing periods can be set
per day.
8. Press the OK button (7) to conrm and
the selection returns to the left of the
day. If you only want to set a mowing
period, return to the day or to
the main menu with the back button
(5).
9. Repeat steps 5.-8. to select the sched-
ule period for each day of the week.
10. Press the OK button (7) to conrm the
result of this setting.
Deleting a schedule
1. Move the selection with the arrow but-
tons (6) to “All” (top left).
2. Press and hold the back button (5) to
delete the entire schedule for the week.
Setting the operating times
1. If necessary, open the cover (1).
2. Unlock the display (10) with the 4-digit
PIN.
3. Press the OK button (7) to enter the
main menu.
4. Use the arrow buttons (6) to select “Set-
tings”.
5. Conrm the selection with the OK but-
ton (7).
6. Use the arrow buttons (6) to select “Op-
erating time”.
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMRA 20-Li B2 - IAN 462730 Robot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMRA 20-Li B2 - IAN 462730 Robot in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info