819505

Parkside PMRA 20-Li B2 - IAN 462730 Robot Manual

50
Zoom out
Zoom in
Previous page
1/388
Next page
GB MT
50
• Avoid creating corners with a 90° an-
gle. Instead, divide them into two 45°
angles (side a ≤ 20 cm).
• The lawn mower is able to detect and
avoid stationary and  xed obstacles
higher than 10 cm after contact (e.g.
walls, garden furniture, etc.). Protect
sensitive obstacles (e.g.  owerbeds) on
the lawn area with the boundary wire
(11). at least 30 cm (11.8 inches)
• Keep a distance of at least 1 m be-
tween bordered obstacles. Border ob-
stacles that do not meet this minimum
distance as a single obstacle.
Course for laying line of bound-
ary wire
at least 1 m (39.37 inches)
• Never cross over the boundary wire.
This can lead to faults and failures in
the lawn mower’s operation.
Trees
The lawn mower detects trees as a normal
obstacle. However, protruding roots may
damage the underside/blades (20).
We recommend using the boundary wire
(11) to also border trees.
at least 30 cm (11.8 inches), larger
to measure
Rocks
• Remove small rocks (lower than
100mm) from the lawn area. These
may damage the device and the
blades (20).
• The lawn mower detects rocks (taller
than 100mm) as normal obstacles.
We recommend using the boundary
wire (11) to also border rocks.
Slopes/gradients
The lawn mower is able to traverse uphill
slopes/gradients up to max. 25° (47%).
At a distance of 1 m from the boundary
wire, the slope/gradient should not exceed
5.7° (10 %).
Make sure that a distance of at
least 30 cm is maintained between
the boundary wire (11) and an obstacle
on an uphill gradient and at least 40 cm
on a downhill gradient.
Open water areas
Open water areas should be bordered by
the boundary wire (11) where possible or
designed so that the lawn mower cannot
enter the water. This may seriously damage
the device’s electronics.
35 cm (13.78 inches) to (small)
walls
70 cm (27.56 inches) to the wa-
ter
30 cm (11.8 inches) to a show-
er surface/tap
Paths/roads
The lawn mower can easily cross paths
and roads at ground level.
If there are height differences between the
lawn area and path/road, border off the
path/road with a safety distance of ap-
prox. 40 cm.
≥
Boundary wire
35 cm (13.78 inches) to ledges
2 cm or greater or walls
5 cm (1.96 inches) to footpaths
and lawn edges
Narrow passages
Narrow passages on the bordered lawn
area should be at least 1.2 m wide and no
more than 8 m long.
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMRA 20-Li B2 - IAN 462730 Robot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMRA 20-Li B2 - IAN 462730 Robot in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info