819505
48
Zoom out
Zoom in
Previous page
1/388
Next page
GB MT
48
Cut injuries if suitable gloves
are not worn.
Warning! During operation,
this power tool produces an
electromagnetic  eld. Under
certain circumstances, this
eld may negatively affect
active or passive medical
implants. In order to reduce
the danger of serious or fa-
tal injuries, users who wear
medical implants must consult
their doctor and the manu-
facturer of the implant before
operating the machine.
Installation
Refer to the separate installation
manual for a detailed description.
Required tools
(not included in delivery):
- Phillips screwdriver
- Wire stripper
- Measuring tape
- Hammer
- Optional: Drill, drilling machine, two
dowels, two screws (>M5)
Do you need support? We offer
an installation service. Find out
more on our website:
www.grizzlytools.de/service/maehroboter-
installationsservice
Preparation
Regularly check the lawn for stones,
branches, wires and debris that
could cause damage to the device and
blades.
1. Sketch the garden.
2. Charge the battery (32).
3. Press the rulers out of the box.
Fastening the power supply
unit
Do not store the power sup-
ply unit lying directly on the
ground.
The power supply unit should be
placed at a height inaccessible to chil-
dren (e.g. 160 cm).
The screw head can have a diameter
of 7 - 10 mm.
1. Mark two drill holes with a pencil or
similar.
2. Drill the holes with a drill bit suitable
for the material.
3. Press two dowels into the drill holes.
4. Attach the power supply unit to the wall
with two screws.
When drilling, be careful not
to damage any supply lines.
Usesuitablesearchdevicestond
these or consult an installation plan
for guidance. Contact with electrical
cables can lead to electric shock
andre.Contactwithagasline
can result in an explosion. Damage
to a water pipe can lead to proper-
ty damage and electric shock.
Assembling the charging
station
Illustration :
1. Place the charging unit (22) with the
two lugs  rst into the baseplate (21) of
the charging station.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMRA 20-Li B2 - IAN 462730 Robot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMRA 20-Li B2 - IAN 462730 Robot in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info