819505
46
Zoom out
Zoom in
Previous page
1/388
Next page
GB MT
46
that your ngers do not become
caught between the rotating
blades and stationary parts of
the machine.
Ensure that only replacement
cutting tools approved by the
manufacturer are used.
Electrical safety:
Make sure that the mains volt-
age matches the details on the
type plate.
Avoid body contact with
earthed parts (e.g. metal fences,
metal posts).
Keep the power cord away from
the cutting tool when working.
The cutting blades can damage
the power cord and lead to con-
tact with live parts.
Do not use the power cord to
pull the plug from the outlet. Pro-
tect the power cord from heat,
oil and sharp edges.
Switch the device off and pull
the mains plug out of the outlet
if the power cord is damaged.
If the cord of this device is dam-
aged, it must be replaced by the
manufacturer or their customer
service or by a similarly qual-
ied person in order to avoid
hazards.
Do not connect a damaged
power cord to the power sup-
ply. Do not touch a damaged
power cord as long as it is con-
nected to the power supply. A
damaged power cord can result
in voltage-carrying parts being
touched.
Only connect the machine and/
or its peripherals to supply cir-
cuits protected by a residual cur-
rent device with a rated residual
current of no more than 30 mA.
Special safety instructions for
battery-powered devices:
Ensure that the device is
switched off before inserting the
rechargeable battery. Inserting
a battery into a power tool that
is switched on can lead to acci-
dents.
Only charge your batteries in-
doors since the charger is not
designed for outdoor use. Dan-
ger of electric shock.
In order to minimise the risk of
electric shock, pull the charger
plug out of the outlet prior to
cleaning it.
Do not expose the battery to
direct sunlight for long periods
and do not place it on a radia-
tor. Heat damages the battery
and there is a risk of explosion.
If warm, allow the battery to
cool before charging.
Do not open the battery and
avoid mechanical damage to
the battery. There is a risk of a
short circuit and vapours may
leak out, causing irritation to
the respiratory tract. Seek fresh
air and also seek medical assis-
tance in case of complaints.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMRA 20-Li B2 - IAN 462730 Robot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMRA 20-Li B2 - IAN 462730 Robot in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info