Manual Parkside PMRA 20-Li B2 - IAN 462730 Robot (page 44 of 388) (English, German, Dutch, Danish, French, Italian, Polish, Spanish)

819505

Zoom out

Zoom in

1/388

GB MT

tion of the device before using

it. Do not use the device if its

safety equipment, parts of the

cutting unit or bolts are missing,

worn or damaged. Damaged

tools and bolts must only be

replaced as a set to prevent im-

balance.

• Take care when using devices

with several cutting tools since

the movement of one blade can

lead to rotation of the other

blades.

• Only use spare parts and acces-

sories which are supplied and

recommended by the manufac-

turer. Using externally produced

parts results in the immediate

loss of the warranty claim.

• Ensure correct installation of

the automatic perimeter guard

system according to the instruc-

tions.

Using the device:

Do not bring your feet or

hands into the vicinity of

rotating parts (or beneath

them) when working. Risk of

injury!

Observe noise protection

rules and other local regula-

tions.

• Never leave the machine unat-

tended if you know that pets,

children or other people are

nearby.

• Use the machine only in day-

light or with good articial light-

ing.

• Avoid operating the machine

when the grass is wet.

• Do not operate the machine if

you are not wearing closed foot-

wear. Always wear sturdy shoes

and long trousers.

• Always make sure you have a

rm footing on slopes.

• Be especially careful when turn-

ing the machine towards you.

• If foreign bodies enter the cut-

ting tools, or if the machine

generates unusual noises or

vibrates unusually, immediately

turn off the power supply (STOP)

and allow the machine to come

to a standstill. Disconnect the

machine from the mains supply

and perform the following steps

before switching the machine

on again and operating it:

- Check the machine for dam-

age;

- replace or repair all damaged

parts;

- check whether there are any

loose parts and tighten as nec-

essary.

• Switch off the device, wait for

the blades to come to a stop

and remove the battery from the

device.

– before a blockage is removed;

– before checking, cleaning or

working on the machine;

– to check the machine for dam-

age after a foreign object has

entered;

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMRA 20-Li B2 - IAN 462730 Robot in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PMRA 20-Li B2 - IAN 462730 Robot Manual

Product: