Manual Parkside PHKSA 12 B3 (page 13 of 58) (English, German, Dutch)

766894

Zoom out

Zoom in

1/58

GB IE NI

a jammed saw blade. Large

plates can bend under their

own weight. Plates must be

supported on both sides, not

only near the sawing gap, but

also at the edge.

e) Do not use any blunt or

damaged saw blades. Saw

blades with blunt or improperly

aligned teeth cause increased

friction, saw blade jamming

and spring-back due to an

excessively tight sawing gap.

f) Before sawing, x the cutting

depth and cutting angle settings.

If the settings change during

sawing, the saw blade can jam,

resulting in spring-back.

g) Be particularly careful when

sawing existing walls or other

areas where you cannot see

what is there. During sawing,

the cutting saw blade can jam

in hidden objects and cause

spring-back.

FUNCTION OF THE BOTTOM

PROTECTIVE HOOD

a) Before each use, check whether

the bottom protective hood

closes properly. Do not use the

saw if the bottom protective

hood does not move freely or

close right away. Never clamp

or bind the bottom protective

hood in an open position. If the

saw accidentally falls to the

ground, the bottom protective

hood may be bent. Open the

protective hood using the pull

lever and make sure that it

moves freely and does not touch

the saw blade or other parts at

all cutting angles and depths.

b) Check the function of the

springs for the bottom protective

hood. If the bottom protective

hood and spring do not work

properly, have the saw serviced

before using it. Damaged parts,

sticky deposits or accumulations

of chips cause the bottom

protective hood to work with a

delay.

c) Only open the bottom protective

hood by hand for special

cuts, such as “plunge and

angular cuts”. Open the bottom

protective hood with the pull

lever and release it as soon

as the saw blade cuts into the

workpiece. For all other sawing,

the bottom protective hood

should work automatically.

d) Do not place the saw on the

work bench or the oor if the

bottom protective hood is not

covering the saw blade. An

unprotected saw blade that

is still running will move the

saw in the direction opposite

of the cutting direction and

cut whatever is in its way. Pay

attention to how long the saw

blade remains running.

Operation

Removing/inserting the

Battery

1. To remove the battery (4) from the ap-

pliance, press the release button (3) on

the battery and pull out the battery.

2. To insert the battery (4), place it on the

guide track and push it into the appli-

ance. It will audibly snap in.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHKSA 12 B3 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHKSA 12 B3 Manual

Product: