Manual Parkside PHKSA 12 B3 (page 12 of 58) (English, German, Dutch)

766894

Zoom out

Zoom in

1/58

GB IE NI

a straight edge guide. This

improves the cutting precision

while minimising the possibility

of the saw blade jamming.

g) Always use the right size saw

blades with the appropriate

locating holes (e.g. diamond or

round). Saw blades that do not

t in the saw tting parts run

unevenly and lead to a loss of

control.

h) Never use damaged or incorrect

saw blade washers or screws.

The saw blade washers

and screws were designed

specically for your saw to

ensure optimal performance

and dependability.

Further safety instructions

for all saws

SPRING-BACK – CAUSES AND

CORRESPONDING SAFETY

INSTRUCTIONS

• Spring-back is the sudden

reaction caused by a jammed,

stuck or improperly aligned

saw blade resulting in an out-of-

control saw lifting and moving

out of the workpiece and

towards the operator.

• If the saw blade snags or gets

caught in the closing sawing

gap or sticks, it will jam, and

the motor force will kick the saw

back towards the operator.

• If the saw blade is twisted in the

saw cut or incorrectly aligned,

the teeth of the rear edge of

the saw blade can jam in the

wood surface, causing the saw

blade to move out of the sawing

gap and the saw to recoil in the

direction of the operator.

Spring-back is caused by wrongly

or incorrectly operating the saw.

It can be avoided by suitable

precautionary measures, such as

those described below.

a) Hold the saw rmly and bring

your arm into a position in

which you can resist the spring-

back force. Always hold onto

the side of the saw blade and

never align the saw blade with

your body. In the event of a

spring-back, the circular saw

can kick back, but the operator

can keep control over the

spring-back forces using suitable

precautionary measures.

b) If the saw blade jams or you

interrupt your work, switch

the saw off and keep it still in

the workpiece until the saw

blade has come to a full stop.

Never try to remove the saw

from the workpiece or pull it

back as long as the saw blade

is moving, as otherwise it may

spring back. Identify and correct

the cause of the saw blade

jamming.

c) If you want to restart a saw

that is in the workpiece, centre

the saw blade in the sawing

gap and check whether the

teeth are jammed in the

workpiece. If the saw blade

jams, it can move out of the

workpiece or cause spring-back

when the saw is restarted.

d) Support large plates to reduce

the risk of spring-back due to

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHKSA 12 B3 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHKSA 12 B3 Manual

Product: