766894
14
Zoom out
Zoom in
Previous page
1/58
Next page
GB IE NI
14
Checking the battery charge
level
The battery’s ( 4) charge level is indicat-
ed by the charge state indicator ( 18).
The LEDs indicate the battery’s charge
level, when the device is in operation.
Press and hold the power button ( 2).
red-yellow-green => Battery fully charged
red and yellow => Battery half charged
red => Battery needs
to be charged
Recharging the battery
Allow a hot battery to cool before
charging.
Charge the battery ( 4) when
only the red LED on the level indica-
tor is illuminated.
The charging time is around 1 hour
(PLGK 12 B2).
1. Remove the battery ( 4) from the ap-
pliance.
2. Plug the battery charger ( 27) into a
mains outlet.
3. Insert the battery ( 4) in the charg-
ing compartment of the battery charger
(27).
4. Pull the battery ( 4) out of the bat-
tery charger ( 27).
5. Unplug the battery charger ( 27)
from the mains.
Checking the function of
the protective hood
Pull the pull lever for the protective
hood ( 23) back as far as it will
go. The protective hood (9) must move
freely without jamming and jump back
to the original position automatically
when the pull lever for the protective
hood ( 23) is released.
Always keep the protective hood
(9) free of sawdust to keep it from
jamming the mechanism.
Installing/changing the
saw blade
Switch off the device and remove
the battery before carrying out any
work.
1. Set the cutting depth to the minimum
position, 0mm (using the retaining
screw (6) ).
2. Using the pull lever for the protective
hood (23), move the protective hood
back and switch the device off.
3. Press and hold down the spindle lock
(15).
4. Loosen the clamping screw (22) with
the Allen key (24).
5. Now, remove the clamping screw (22)
and the clamping ange (21).
6. Pull the pull lever for the protective
hood (23) all the way back and hold
the protective hood (9) in this position.
7. Carefully remove the saw blade (8)
from the device from below.
8. Install the saw blade (8) in the reverse
order.
WARNING! The arrow on the saw
blade must match the direction ar-
row (direction of travel, marked on
the protective hood).
Make sure that the saw blade is
suitable for the speed of the tool.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHKSA 12 B3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHKSA 12 B3 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info