Manual Parkside PHKSA 12 B3 (page 15 of 58) (English, German, Dutch)

766894

Zoom out

Zoom in

1/58

GB IE NI

Connecting the dust ex-

traction 

There are three options for connecting the

permitted dust and shavings extraction.

Depending on the diameter of the hose

for the dust and shavings extraction, select

one of the following options:

• Connecting the dust and shavings

extraction directly

1. Connect the dust and shavings

extraction directly to the shavings

ejector (17).

• Connecting the dust and shavings

extraction to the adapter (20)

1 Place the dust extraction adapter

(20) on the shavings ejector (17).

2. Connect the dust and shavings ex-

traction to the adapter (20).

• Connecting the dust and shavings

extraction to the adapter (20) and

reducer (20a)

1. Place the dust extraction adapter

(20) on the shavings ejector (17).

2 Place the reducer (20a) on the dust

extraction adapter (20).

3. Connect the dust and shavings ex-

traction to the adapter (20).

When working with materials that

produce dangerous dust, connect

the device to an appropriate, tested

dust class M suction device.

Mounting the parallel

stop

1. Loosen the buttery screw for the pa-

rallel stop holder (12) and insert the

parallel stop (11) in the parallel stop

holder (10).

2. Set the desired cutting width using the

scale on the parallel stop and the reces-

ses on the bottom side of the baseplate

(see also Fig. D). The left recess on the

bottom of the baseplate is for cutting

angle setting 0°. The right recess on the

bottom of the baseplate is for cutting

angle setting 45°.

3. Retighten the buttery screw for the par-

allel stop holder (12).

Overload warning

• If the device is in danger of being da-

maged, the overload warning indicator

(19) lights up briey. The device

turns off.

Adjusting the cutting

angle

You can set the cutting angle using the cut-

ting angle scale (14).

1. Loosen the buttery screw of the cutting

angle preselection (13).

2. Set the desired angle on the cutting

angle scale (14) based on the referen-

ce mark (29).

3. Retighten the buttery screw (13).

Adjusting the cutting

depth

Set the cutting depth approx. 3mm

larger than the material thickness.

This achieves a clean cut.

1. Loosen the retaining screw (6) and set

the desired cutting depth on the cutting

depth scale (5) based on the reference

mark (28).

2. Retighten the retaining screw (6).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHKSA 12 B3 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHKSA 12 B3 Manual

Product: