766894
11
Zoom out
Zoom in
Previous page
1/58
Next page
GB IE NI
11
9) RESIDUAL RISKS
Even if properly operating and
handling this electric tool, some
residual risks will remain. Due to its
construction and build, this electric
tool may present the following haz-
ards:
a) Cuts
b) Ear damage if working without
ear protection.
c) Damage to your health caused
by swinging your hands and
arms when operating the appli-
ance for longer periods of time
or if the unit is not held or main-
tained properly.
Warning! During operation,
this electric tool generates an
electromagnetic eld which,
under certain circumstances,
may impair the functionality
of active or passive medical
implants. To reduce the risk of
serious or lethal injuries, we
recommend that persons with
medical implants consult their
doctor and the manufacturer
of their medical implant be-
fore operating the machine.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your battery and char-
ger from the Parkside
X12VTeam series. A
detailed description of
the charging process
and further information
can be found in the se-
parate operating inst-
ructions.
Device-specic safety
instructions for circular
hand saws
SAFETY INSTRUCTIONS FOR ALL
SAWS, SAWING METHOD
a) DANGER! Do not put your
hands in the cutting area
or on the saw blade. If you hold
the saw with both hands, they
cannot be injured by the saw
blade.
b) Do not reach underneath the
workpiece. The protective hood
cannot protect you from the saw
blade under the workpiece.
c) Adjust the cutting depth to the
thickness of the workpiece. Less
than one full tooth height should
be visible below the workpiece.
d) Never hold the workpiece you
want to saw in your hands
or over your leg. Secure the
workpiece in a sturdy support.
It is important to fasten the
workpiece securely to minimise
the risk of physical contact, the
saw blade jamming and loss of
control.
e) Hold the electric tool by the
insulated gripping surfaces
when performing work in which
the cutting tool may come into
contact with hidden wiring.
Contact with a live wire also
causes a charge in metal parts
of the electric tool and results in
an electric shock.
f) When performing longitudinal
cuts, always use a stop or
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHKSA 12 B3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHKSA 12 B3 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info