764049
16
Zoom out
Zoom in
Previous page
1/104
Next page
16
GB IE NI
Pivoting the pole-
mounted pruner
1. Press the locking button (31) and hold
it down.
2. Hold the pole-mounted pruner by the
blade encasing (22) and turn it to the
desired position.
There are four possible positions.
3. Fix the pruner by releasing the locking
button (31).
4. Check that the pruner is locked in the
selected position.
Do not make a relief cut with the
saw head tilted. There is a risk of
kickback, which may render the
device uncontrollable.
Putting on the carrying
strap
Never wear the carrying
strap diagonally across your
shoulders and chest: only
wear it on one shoulder to
ensure you can detach the
device quickly from your
body in the event of danger.
Pulling the push-t lock (9) releases
the device quickly from the carry-
ing strap. To open the push-t lock,
press the two clamps together.
1. Place the carrying strap (10) on one
shoulder.
2. Adjust the length of the strap so that
the snap hook is approximately 10 cm
below your hip.
3. Attach the snap hook on the eyelet (8)
to insert the carrying strap
Moving the eyelet for
the carrying strap
You can slide the eyelet (8) to better
spread the weight of the device.
1. Loosen the hexagon socket screw (32)
on the eyelet (8) for the carrying strap
using the Allen key (21) from the stor-
age (
A
12) on the handle.
2. Slide the eyelet (8) to the appropriate
position.
3. Re-tighten the hexagon socket screw
(32).
Adjusting/mounting the
additional handle
Mounting the additional handle
1. Open the locking button for the addi-
tional handle (33) on the bottom of the
additional handle (17).
2. Push the additional handle (17) onto
the tubular shaft (7).
3. Fold the locking button for the addi-
tional handle (33) to x the position.
Adjusting the position
1. Unfold the locking button for the addi-
tional handle (33) on the bottom of the
additional handle (17).
2. Move the additional handle (17) to the
desired position on the tubular shaft
(7).
3. Fold the locking button for the addi-
tional handle (33) to x the position.
Adjusting the angle
1. Loosen the quick-release lever (16) on
the handle (17).
2. Set to the desired angle.
3. Close the quick-release lever.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PAHE 20-Li B2 - IAN 354671 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAHE 20-Li B2 - IAN 354671 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info