Manual Parkside PAHE 20-Li B2 - IAN 354671 (page 15 of 104) (English, German, Dutch, Danish)

764049

Zoom out

Zoom in

1/104

IEGB NI

Ensure that the equipment is

functional before each use.

The On/Off switch and the

safety switch must not be

held closed. They must switch

off the motor when on is

released. Should a switch

be damaged, stop working

with the equipment. Ensure

that the mains voltage value

matches the label on the

equipment.

Note noise protection and local

specications. The use of the equip-

ment on certain days (e.g. Sundays

and national holidays), at certain

times of day (lunch times, night time

quiet periods) or in special areas

(e.g. health resorts, clinics etc.) is

restricted or forbidden.

Chain lubrication

The blade bar and saw chain must

never be operated without oil. If the

pole-mounted pruner is used with

too little oil, the cutting performance

and lifespan of the saw chain will

decrease as the saw chain will be-

come blunt more quickly. You can

identify when there is too little oil

if smoke develops or the blade bar

changes colour.

The oil ows to the blade bar as soon as

the motor starts working.

Filling with chain oil:

• Check the oil level indicator (30) on

the oil tank regularly and top up with

oil once the minimum mark “OIL min”

is reached. The oil tank holds about 65

ml of oil.

• Use bio-oil containing additives to re-

duce friction and wear. You can order

this from our service centre.

Alternatively, use chain lubricating oil

with a low proportion of adhesion addi-

tives.

• Empty the oil tank if it will not be used for

a prolonged period of time (6-8 weeks).

1. Unscrew the oil tank cap (29) and pour

the chain oil into the tank.

2. Wipe away any spilt oil and close the

oil tank cap (29).

Always turn off the device

and let the motor cool down

before lling with chain oil.

Overowing oil can cause a

re.

Checking the oil automation

Before starting work, check the oil automa-

tion system.

• Push the tubular shaft (7) completely

together (see “Extending the tubular

shaft”), switch on the device and hold

the blade bar (1) over a light back-

ground. The device should not touch

the ground.

If a trace of oil appears, the device is

working awlessly.

If no trace of oil appears, clean the

oil passage (23) or have the device

repaired by our customer service

department.

Clean the oil passage (23) to en-

sure fault-free, automatic oiling of

the saw chain during operation.

Use a brush or a cloth to help re-

move residues from the oil passage

(23).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAHE 20-Li B2 - IAN 354671 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 2,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PAHE 20-Li B2 - IAN 354671 Manual

Product: