Manual Parkside PAHE 20-Li B2 - IAN 354671 (page 13 of 104) (English, German, Dutch, Danish)

764049

Zoom out

Zoom in

1/104

IEGB NI

and serious injuries to the per-

son working with the device.

• Secure the device well during

transport to prevent damage to

the device and injuries.

• Before use, check the device for

loose fastenings and damaged

parts, such as cracks in the cut-

ting attachments.

• Wear non-slip protective shoes

and close-tting clothing.

• Do not use any accessories

that are not recommended by

PARKSIDE. This can result in

electric shock or re.

Observe the safety in-

formation and notes on

charging and proper use as

shown in the instruction

manual for your battery and

charger from the Parkside

X20VTeam series. A de-

tailed description of the

charging process and further

information can be found in

the separate operating in-

structions.

Assembly

Remove the battery from the

device before carrying out

any work on the device.

Only use original parts.

Dismantling is carried out in reverse

order.

Remove/insert battery

1. To remove the battery (11) from the

device, press the release button on the

battery and pull the battery out.

2. To insert the battery (11), push the

battery along the guide rail into the

device. You will hear it click into place.

Only insert the rechargeable

batteries once the device is

completely assembled. Risk

of injury!

Mounting the saw chain

Wear cut-resistant gloves while

working with the saw chain.

Pay attention to the correct rotation

direction of the saw chain (2). This

is specied on the chain wheel co-

ver (5)and on the blade (1).

Tension the saw chain in accordan-

ce with the rst 5-6 steps.

See section “Tensioning the saw

chain”.

1. Place the device on a level surface.

2. Remove the sprocket cover (5) by loos-

ening the wing nut (3) .

3. Place the sawing chain (2) into the bla-

de groove. Place the sawing chain (2)

into the chain sprocket (25).

4. Place the blade bar (1) and saw chain

(2) onto the rail bolts (24). When the

nose on the right below the guide bolt

sits in the lower round recess on the

blade bar, the blade bar is placed cor-

rectly. It is normal for the saw chain (2)

to sag.

5. Put the chain wheel cover (5) on. Only

lightly tighten the wing nut (3) of the

chain wheel cover as the saw chain

must still be tensioned.

6. Tension the saw chain (2) by turning

the ring (4) of the chain tensioning

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAHE 20-Li B2 - IAN 354671 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 2,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PAHE 20-Li B2 - IAN 354671 Manual

Product: