764049
14
Zoom out
Zoom in
Previous page
1/104
Next page
14
GB IE NI
system . Then rmly tighten the chain
wheel cover wing nut (3).
Caution! The pole-mounted pruner
can be prone to leaks.
Tensioning the saw chain
Regularly tightening the saw chain provi-
des safety for the user and reduces and/or
prevents wear and chain damage. Before
starting work and at intervals of approx.
10 minute, we recommend the user to
examine the chain tension and correct it if
necessary.
The saw chain warms up when working
with the saw and thus expands slightly.
These „expansions“ can be expected espe-
cially from newer saw chains.
Do not re-tension or change the
saw chain when it is hot because it
shrinks slightly once it has cooled
down. If this is not observed it can
lead to damage on the guide rail or
the motor because the saw chain is
now too taut on the blade bar.
Chain tension and chain lubrication have
a signicant impact on the service life of
the saw chain.
10 min
The saw chain is
properly tensi-
oned when it
does not hang
from the underside of the blade bar and
cannot be moved around by a gloved
hand. When pulling on the saw chain with
9 N (approx. 1 kg) of force, the saw chain
and blade bar should not be separated by
a distance of more than 2 mm.
Risk of injury!
Remove the batteries from
the device before working
on the device.
B
Tensioning the saw chain
The chain tensioning ring (4) can-
not be turned more than three
quarters of a turn. When you are
tensioning the chain for the rst
time, the arrow of the ring (4) and
the arrow on the housing of the unit
must point to each other.
1. Loosen the wing nut (3) .
2. Tension the saw chain (2) by turning
the ring (4) of the chain tensioning sys-
tem clockwise .
Reduce the saw chain tension by turn-
ing the ring anti-clockwise .
3. Tighten the wing nut (3) .
The chain tension of a new saw
chain must be readjusted after a
maximum of 5 cuts.
Assembling the motor
head
1. Insert the extension arm (27) into the
threaded coupling (26) on the motor
head (19). The lug on the extension
arm (28) must engage in the recess on
the threaded coupling!
2. Screw the coupling nut (6) tight.
Initial Operation
Do not use the equipment
without the hand guard.
Wear suitable clothing and
work gloves when working
with the equipment.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PAHE 20-Li B2 - IAN 354671 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAHE 20-Li B2 - IAN 354671 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info