764049
17
Zoom out
Zoom in
Previous page
1/104
Next page
17
IEGB NI
Extending the tubular
shaft
1. Unfold the locking mechanism of the
telescopic extension (18) on the tubular
shaft (7).
2. Set the extension arm (27) to the de-
sired length.
3. Fold the locking mechanism of the tel-
escopic extension (18) to x the length.
Switching on and off
Ensure your stance is stable and
hold the appliance tightly with both
hands and away from your body.
Before switching the apparatus on,
make sure that it is not touching
any objects.
1. Push the battery (11) along the guide
rail into the device. You will hear it
click into place.
2. To switch on, slide the safety switch
(15) forwards and press the on/
off switch at the same time (13). The
device will run at top speed. You can
release the safety switch (15) again.
3. To switch it off, release the on/off
switch (13).
Safe working
If the saw chain gets stuck,
do
not attempt to pull out the
pruner with force. There is a
risk of
injury. Turn the motor
off
and use a lever arm or
wedge to release the pruner.
To avoid eye injuries, always wear
safety goggles while working with the
pole pruner.
Always wear the carrying strap pro-
vided when operating the device.
In order to detect signicant defects,
carry out a visual inspection before
use, after the device is dropped or if
it suffers any kind of impact. In case
of any defects, do not use the device.
Instead contact.
Do not use the high pruning saw when
standing on a ladder or in an unsafe
position.
Do not be tempted to make unconsid-
ered cuts. Doing so may endanger
both yourself and others.
Children must be supervised to ensure
that they do not play with the equip-
ment.
Long use of the equipment can result in
vibration-related circulatory disorders
in the hands. However, the length of
use can be extended by using suitable
gloves or taking regular breaks. Note
that a personal tendency for poor cir-
culation, low outdoor temperatures, or
high gripping forces during work will
reduce the length of use.
While using the pole-mounted pruner,
pay attention to the specied working
angle of max. 60° in order to ensu-
re that you work safely with the device.
(See illustration )
Always stand on the slope above or to
the side of the branch to be sawn.
Hold the device as close as possible
to your body. This will ensure the best
balance.
The saw chain should have reached its
maximum speed before you begin saw-
ing.
Ensure that the saw chain does not get
stuck while sawing. The log must not
break or splinter.
If the saw chain gets stuck, switch off
the device immediately and remove the
rechargeable battery. Then remove the
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PAHE 20-Li B2 - IAN 354671 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAHE 20-Li B2 - IAN 354671 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info