764049
18
Zoom out
Zoom in
Previous page
1/104
Next page
18
GB IE NI
object that is causing the device to get
stuck.
If the blade gets stuck while cutting,
switch off the device and remove the
rechargeable battery. Free the blade
from the cut using a wedge.
You will have better control over the
device if you saw using the lower edge
of the blade bar (saw chain in pulling
direction) and not using the upper edge
of the blade bar (saw chain in pushing
direction).
Please also observe the precautionary
measures to protect against kickback
(see the safety information).
Remove branches hanging downwards
by sawing from the top of the branch.
Twisted branches must be individually
cut down to size.
The saw chain must not touch the
ground or any object while sawing
through the material or thereafter.
Due to the risk of ung and falling
objects, make sure to keep bystanders
away from the device.
Stay at least 10 m away from over-
head power lines. Avoid starting the
power tool unintentionally.
Putting down the device
Place the device on the ground with the
motor head rst.
The cutting unit must be placed on the
ground
without being subjected to any pres-
sure.
Do not apply any static pressure what-
soever to the cutting unit.
Cutting techniques using the
pole-mounted pruner
Be aware of the risk of kick-
back as well as falling branches
and branches on the ground.
Sawing off small branches:
Place the locating surface of the saw
against the branch in order to prevent
jerky movements of the saw when you
begin to cut it. Guide the saw with light
pressure from the top to the bottom
through the branch.
Watch out for premature breakage of
the branch if you have misjudged the
size and weight.
Sawing off larger branches:
In the case of larger branches, select
a relief cut rst of all to ensure that the
sawing process is controlled. To do
this, saw an incision (a) into the bot-
tom third of the branch (with the upper
side of the blade). Then saw from top
to bottom towards the rst cut (with the
underside of the blade) (b).
Sawing in sections:
Saw off large or long branches in sec-
tions so that you have control over the
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PAHE 20-Li B2 - IAN 354671 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAHE 20-Li B2 - IAN 354671 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info