764049
20
Zoom out
Zoom in
Previous page
1/104
Next page
20
GB IE NI
Service intervals table
Machine part Action Before each
use After 10 hrs of use
Complete machine Check condition, replace da-
maged parts as needed
Accessible screws
and nuts Tighten
Saw chain Check, apply oil, reground or
replace
Blade bar Check, rotate, clean, apply oil
Sharpening the cutting teeth
Have the saw chain sharpened by a spe-
cialist, or proceed in accordance with the
operating manual for your saw chain shar-
pening device. Sharpening a saw chain
requires some practice. Replacing the saw
chain is preferable in case of doubt.
Changing the saw chain
Wear gloves when handling the
saw chain.
Never attach a new saw chain
onto worn teeth, or onto a dama-
ged or worn blade bar.
1. Switch off the device and remove the
batteries.
2. Remove the sprocket cover (5) by loos-
ening the wing nut (3) rst .
3. Remove the old saw chain (2).
The mounting and tensioning of the new
saw chain is described in the Assembly -
Mounting the saw chain” and “Tensioning
the saw chain” section.
Servicing the blade bar
The blade bar has to be reversed every
8-10 operational hours in order to ensure
even wear (see the “Servicing and clea-
ning - rotating the blade bar” chapter”).
1. Switch off the device and remove the
battery.
2. Remove the sprocket cover
(5), the saw chain (2) and the blade
bar (1).
3. Check the blade bar (1) for wear. Re-
move burrs and straighten the guide
surfaces with a at le.
4. Clean the oil passage (23) to ensure
fault-free, automatic oiling of the saw
chain during operation.
5. Mount the blade bar, saw chain and
sprocket cover and retighten the saw
chain (see the Assembly” chapter).
Turning the blade bar
Wear gloves when handling the
saw chain.
1. Switch off the device and remove the
battery.
2. Remove the sprocket cover (5) by loos-
ening the wing nut (3) rst .
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PAHE 20-Li B2 - IAN 354671 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAHE 20-Li B2 - IAN 354671 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info