746864
19
Zoom out
Zoom in
Previous page
1/64
Next page
GB/IE/NI
19
Operation
Operation
Connecting the compressed
air supply
NOTE
The air-driven sandblasting
gun
1
must be operated with compressed air that
is clean, oil-free, moisture-free and at a maximum
pressure of 6.3 bar. To regulate the compressed air
supply, a pressure regulator and filter should be
used (e.g. Parkside Compressed Air Maintenance
Unit PDWE 8 A1).
Connect the air-driven sandblasting gun
1
to a suitable compressed air supply. Plug the
quick-connect plug on the supply hose into the
barbed fitting
2
on the air-driven sandblasting
gun
1
. The plug locks into place automati-
cally.
NOTE
Ensure that the rotary control
7
is set to “0” before you connect the device to
your compressed air supply.
Filling the blasting material
tank
ATTENTION
Before opening the screw cap
on the
9
blasting material tank
8
or changing
any other settings, the device must be completely
depressurised and the sandblasting gun must be
disconnected from the compressed air supply
(e.g. compressor).
Only use compatible blasting material for your
sandblasting work
14
.
NOTE
We recommend using
blasting material with no risk of silicosis (ground
blast furnace slag) with a grit size of 0.2 mm
to 0.8 mm.
Ensure that the blasting material
14
is
absolutely dry and not too coarse-grained.
NOTE
The maximum grit size is
0.8 mm.
Open the screw cap on the
9
blasting material
tank
8
by turning the cap anticlockwise.
Fill the desired quantity of blasting material
14
into the blasting material tank
8
.
Take care not to overfill the tank: the maximum
tank capacity is 900 ml.
Replace and close the screw cap
9
on the
blasting material tank
8
by turning it clock-
wise. Ensure that the screw cap is properly
seated and tightly closed.
NOTE
BLASTING MATERIAL GRIT SIZE
The larger/coarser the grit size of the blasting
material used, the less precise the dirt removal
process. The blasting material included is small
and is very suitable for the removal of rust
bloom or soiling. Finer blasting material is
also gentler on the surface of the material and
abrasion is confined to the surface.
For larger areas of rust, coarser blasting mate-
rial should be used, which can be purchased
from larger stockists. Attention: do not exceed
the maximum grit.
Fitting the collecting bag
for sandblasting material
Using a screwdriver, attach the collecting bag
4
to the device with the screw clamp included
in the package contents
5
.
Selecting and fitting
attachments
Select the attachment that is the best tool for the
job in hand (
10
,
11
,
12
,
13
).
Fit your chosen attachment firmly to the blasting
nozzle
6
, taking care to ensure that no air
can escape at the sides.
292181 Druckluft-Sandstrahlpistole_content_LB8.indb 19 29.11.17 18:34
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 292181 PDSP 1000 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292181 PDSP 1000 C3 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info