746864
17
Zoom out
Zoom in
Previous page
1/64
Next page
GB/IE/NI
17
Introduction/General safety instructions
Technical specifications
Working pressure: 6.3 bar
Air consumption: 320 l/min
Tank capacity: 900 ml
Air quality required: clean and oil-free
Settings
while working: working pressure set at
pressure regulator or
filter pressure gauge
to max. 6.3 bar.
Noise emission level:
Noise emission level measured according to
EN 1265. Typical A-weighted emission sound
pressure level of the pneumatic tool:
Sound pressure level: L
pA
= 95 dB (A)
Uncertainty: K
pA
= 3 dB (A)
Sound power level: L
WA
= 106 dB (A)
Uncertainty: K
WA
= 3 dB (A)
Wear ear protectors!
Vibration total value:
Vibration total value measured according to
EN 12096:
a
h
= 2.5 m/s
2
The vibration level stated
in these instructions has been measured in
accordance with a standardised measurement
procedure given in EN 12096 and can be used to
compare different equipment. The vibration total
value stated can also be used for an initial
estimation of exposure from the machine.The
vibration level will change in accordance with
how the pneumatic tool is used and may in some
cases exceed the value given in these instructions.
The vibration exposure could therefore be
underestimated if the pneumatic tool is regularly
used in this kind of way.
NOTE
For an accurate estimate
of the vibration exposure during a specific period
of working time, periods of time should also be
included in which the device is switched off or is
running but is not actually being actively used
(idling). This can significantly reduce the vibration
exposure over the entire period of working time.

General safety instructions
Read all safety instructions
and other instructions. Failure to follow or comply
with the safety instructions or other instructions
could lead to an electric shock, fire and/or serious
injuries.
Please keep all safety instructions and
other instructions in a safe place.
Workplace safety
a) Ensure that your work area is clean
and well illuminated. Untidiness and
poorly lit work areas can cause accidents to
happen.
b) Do not work with the device in explo-
sion hazard areas, where combustible
liquids, gases or dusts are present. The
device can generate sparks that could ignite
such dusts or fumes.
c) Keep children and other persons out
of the work area while the device is
being used. If you are distracted, you could
lose control of the device.
292181 Druckluft-Sandstrahlpistole_content_LB8.indb 17 29.11.17 18:34
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 292181 PDSP 1000 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292181 PDSP 1000 C3 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info