746864
18
Zoom out
Zoom in
Previous page
1/64
Next page
GB/IE/NI
18
General safety instructions
Device-specific safety
instructions for air-driven
sandblasting equipment
Before setup or first use, check the
device for any damage. Do not start
using the device if it has any obvious
defects.
Keep children and other persons out
of the work area while the device is
being used. If you are distracted, you
could lose control of the device.
DANGER OF INJURY! PROHIBITED
MISUSE! Do not point the device at
people and/or animals.
Wear a dust mask!
Wear protective goggles!
Wear protective gloves!
Wear protective clothing!
EXPLOSION HAZARD!
The air-driven sandblasting gun must
not be used in an environment where
gases, naked flames, fire or gas-
driven water heating systems are
present.
NO SMOKING!
Always work in a room with adequate
ventilation.
Do not use oxygen or combustible
gases as a source of energy.
Never exceed the maximum working
pressure of 6.3 bar.
RECOIL HAZARD!
High working pressures can produce powerful
recoil forces that can in some circumstances create
hazards due to continuous stress and strain.
DANGER OF INJURY!
Disconnect the device from the compressed air
supply before carrying out repair and servicing
or moving the device.
DANGER OF INJURY!
Disconnect the device from the compressed air
supply before filling with blasting material.
NOTE
Please also follow the safety
instructions from the blasting material manufacturer.
Only use materials that are compatible
with the air-driven
1
sandblasting gun.
Always use suitable blasting material!
ATTENTION! Device produces clouds of dust.
Take precautions before use!
Ensure that blasting material is collected for
disposal to avoid polluting the environment.
Do not remove any device labels/type plates.
These are important for safety.
If you do not have experience with using the
device, you should seek training to ensure you
can use it safely.
POISONOUS DUSTS!
Working with harmful/poisonous dusts represents
a health hazard for the device operator or persons
present in the vicinity of the work area.
ATTENTION
Ensure that the device is
disconnected from the compressed air supply when
not in use, when replacing accessory parts or
carrying out repairs. The air hose must not be
under pressure.
292181 Druckluft-Sandstrahlpistole_content_LB8.indb 18 29.11.17 18:34
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 292181 PDSP 1000 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292181 PDSP 1000 C3 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info