746864
21
Zoom out
Zoom in
Previous page
1/64
Next page
GB/IE/NI
21

Troubleshooting
Faults/
Possible cause
Solution
Material does not flow freely
Air is not dry enough Fit a water separator
(water trap) to your
compressed air system.
Air pressure too low Increase the output pres-
sure on your compressor.
Attachment not
properly seated
Ensure that the attach-
ment is fitted firmly to the
device and that no air
can escape at the sides.
Clogged
sandblasting
material supply
line(s)
Check that clumps of
sandblasting material are
not clogging the supply
lines. An air blow gun is
the best tool for cleaning
any clogged supply lines.
(Wear protective
goggles!) Check the
outlet on the tank.
Sandblasting finish is not as expected
Air is not dry enough Fit a water separator
(water trap) to your
compressed air system.
Size of the
sandblasting
material is not
uniform
Replace the sandblasting
material.
Sandblasting
material is
contaminated
Sandblasting material
should be cleaned/
replaced
The attachment
is worn
Replace the attachment
Other faults
Please talk to a sandblasting professional or your
local stockist.
Component parts
(see fold-out page at back)
Item no. Description Quantity
01 Case 1
02 Screw 2
03 Screw 1
04 O-ring 1
05 Pin 1
06 Air valve spring 1
07 O-ring 1
08 Nut for screw 1
09 Spring 1
10 Trigger 1
11 Air inlet 1
12 Socket 1
13 Nozzle 1
14 O-ring 2
15 Cup ring 1
16 Adapter 1
17 Nozzle 1
18 Setting lever 1
19 O-ring 1
20 Connecting lever 1
21 Pin 1
22 Setting knob 1
23 Screw 1
24 Tank 1
25 Nut for screw 1
26 O-ring 1
27 Protective cap 1
28 Screw 1
29 Screw cap 1
30 Handle cover 1
31 Nozzle 1
32 Nozzle 1
33 Nozzle 1
Troubleshooting/Component parts
292181 Druckluft-Sandstrahlpistole_content_LB8.indb 21 29.11.17 18:34
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 292181 PDSP 1000 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292181 PDSP 1000 C3 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info