Manual Parkside IAN 273460 PTK 2000 B2 (page 46 of 204) (English, German, Dutch, French, Italian, Portuguese, Spanish)

745555

Zoom out

Zoom in

1/204

GB IE

Before putting into

operation

• The machine must be set up on a sta-

ble surface, i.e. on the base or similar

item. For this, use the drill holes which

are located in the frame of the machi-

ne. For safe use on a work bench, four

mounted rubber feet are provided



• Before the machine is put into operati-

on, all covers and safety devices must

be properly attached.

• The saw blade must be able to move

freely.

• In the case of wood which has already

been worked with, check for foreign

bodies such as nails or screws etc.

• Before pressing the on/off switch,

make sure that the saw blade is cor-

rectly attached and that moving parts

are free-running.

• Before connecting the machine, check

that the data on the type plate matches

those of the mains system.

• The machine must only be connected

to a properly installed safety socket

which is protected by a fuse of at least

16A.

• If possible, connect the device only to

a socket with a residual current circuit

breaker (RCCB) with a tripping current

of not more than 30 mA.

Operation

Switching on and off

(Figure 23)

- The saw can be switched on by

pressing the green pushbutton „I“.

Before you start sawing, wait until the

saw blade has reached its maximum

speed.

Attaching/changing the

Saw Blade

(Figure 22)

1. Caution! Remove the mains

plug and wear protective

gloves.

2. Dismantle the saw blade guard (2).

3. Remove the table insert (6) by relea-

sing the three countersunk screws (29)

(see Figure 17)

4. Place the hexagon socket key (s) (HX

6) on the bolt and use the jaw spanner

(t) (SW 22) to stop the motor spindle

from turning (see Figure 22).

5. Caution! Turn the bolt in the direction

of rotation of the saw blade.

 



pulling downwards and diagonally.

 

with a wire brush before attaching the

new saw blade.

8. Insert and tighten the new saw blade

in reverse order.

Caution! Note the direction of

motion; the slope of the cutting

edge of the teeth must face the

direction of motion, i.e. for-

wards (see the arrow on the

saw blade guard (2).

9. Reattach and adjust the table insert (6)

and the saw blade guard (2).

10. Before you work with the saw again,

a check must be carried out to ensure

that the protective devices are working

properly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273460 PTK 2000 B2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 273460 PTK 2000 B2 Manual

Product: