745555

Parkside IAN 273460 PTK 2000 B2 Manual

44
Zoom out
Zoom in
Previous page
1/204
Next page
44
GB IE
Caution! Both stand brackets
must be attached to the rear
of the machine at attachment
points 38!
8. Then tighten all of the bolts and nuts of
the base.
Mounting the table width

(Figures 11-14)
1. Loosely tighten the table width extensi-
on (7) and table length extension (15)
on the saw table using the hexagon
bolts (f). (Figure 12).
2. Loosely tighten the table supports
(25, 26) on the housing of the table
circular saw using hexagon bolts (f). In
addition, the table supports (25, 26)
also have to be loosely tightened to
the table width and length extensions.
Mounting material: Hexagon bolts (e),
washer (a) and nut (c). The short sup-
ports (25) are for the table widening
extension, the long supports (26) for
the length extension, (Figures 13, 14).
3. Turn the saw over with the base and

4. Align the table width and length exten-

5. Then tighten all bolts.
Mounting the Suction
Adapter
(Figure 15)
1. Insert the suction adapter (16) into
the opening provided on the rear of
the machine. The side outlet is now
pointing outwards.
2. The suction adapter has a rubber seal;
make sure that this is mounted.
3. The adapter is secured by means of
a bayonet lock. Insert the vacuum
cleaner adapter (16) as shown in
Figure 15 and lock this in place with a
quarter turn in a clockwise direction.
Mounting the Riving Knife
(Figures 16-19)
Caution! Remove the mains plug!
The setting of the saw blade (5)
must be checked whenever a blade
has been replaced.
1. Inserting the batteries (Figure 16):
- Turn the laser on/off switch (35) to the
0 position (laser off).
- Remove the battery compartment cover
(37) by loosening the screw (36).
Now remove the battery compartment
cover (37) by bending at the side.
- Insert the batteries supplied (type
AAA), ensuring the correct polarity
(see Figure 16).
- Put the battery compartment cover (37)
back in position and tighten it with
the screw (36). Notes concerning the
batteries:
- If you are not going to use the laser
for a prolonged period, please remove
the batteries from the battery com-
partment. Otherwise, the leaking of

- Do not place the batteries on radia-
tors or expose them for a prolonged
period to strong sunlight; temperatures
above 50° could damage the device.
2. Adjust the saw blade (5) to a max.
cutting depth, move to the 0° position
and lock in place.
3. Release the screws (29). Remove the
table insert (6) (Figure 17).
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 273460 PTK 2000 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273460 PTK 2000 B2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info