Manual Parkside IAN 273460 PTK 2000 B2 (page 42 of 204) (English, German, Dutch, French, Italian, Portuguese, Spanish)

745555

Zoom out

Zoom in

1/204

GB IE

reduction in the performance of the

machine, as well as a reduction in the

cutting accuracy.

• Avoid switching the machine on by

accident: when inserting the plug into

the socket, the power button must not

be pressed.

• Use the tool which is recommended

in this manual. This will ensure the

optimal performance of your saw.

• Keep your hands away from the

working area when the machine is in

operation.

• Before you carry out any adjustments

or servicing work, turn the device off

and remove the mains plug.

5. Electrical Connection

The installed electric motor is

connected ready for operation.

The connection complies with the

relevant VDE and DIN regulations.

The customer‘s network connection



comply with these regulations.

• The product meets the requirements

of EN 61000-3-11 and is subject to

special connection conditions. This

means that its use at freely selectable

connection points is not permitted.

• If the network conditions are unfa-

vourable, the device may result in



• The maximum permitted mains

impedance at the electrical connec-

tion point of 0.107 ohm must not be

exceeded.

• As the user, you must ensure – in

consultation with your electricity sup-

ply company if necessary – that the

continuous current carrying capacity

of the network at the connection point



connection of the product.

Important Instructions

If the motor is overloaded, it switches

itself off automatically. After cooling down

(times vary), the motor can be switched on

again.

Faulty Electrical

Connection Cable

Insulation damage often occurs to electrical

connection cables.

The causes of this may be as follows:

• Pressure points if connection cables

are routed through windows or door

gaps.

• Kinks caused by improper attachment

or routing of the connection cable.

• Cut surfaces caused by vehicles dri-

ving over the connection cable.

• Insulation damage caused by tearing

out of the wall socket.

• Cracks resulting from the insulation

becoming old.

Such faulty electrical connections must not

be used and may endanger life due to the

damage to the insulation.

Electrical connection cables should be

checked regularly for damage. Ensure that

during such checks, the connection cable is

not connected to the mains.

Electrical connection cables must comply

with the relevant VDE and DIN regulati-

ons. Only use connection cables with the

marking H05VV-F.

It is stipulated by law that the type of con-

nection cable must be printed on it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273460 PTK 2000 B2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 273460 PTK 2000 B2 Manual

Product: