745555
41
Zoom out
Zoom in
Previous page
1/204
Next page
41
GB IE
Safety Instructions for Handling
Batteries
1 Ensure at all times that the batteries
are inserted with the correct polarity (+
and –), as shown on the battery itself.
2 Do not short-circuit the batteries.
3 Do not charge up rechargeable batte-
ries.
4 Do not overcharge the battery!
5 Do not mix old and new batteries or
batteries of a different type or from
different manufacturers! Replace all
batteries of a set at the same time.
6 Remove used batteries immediately
out of the device and dispose of them
correctly!
7 Do not heat the batteries!
8 Do not carry out any welding or solde-
ring work directly to the batteries!
9 Do not take the batteries apart!
10 Do not deform the batteries!
 
12 Store the batteries out of the reach of
children.
13 Do not allow children to replace the
batteries without supervision!
14 Do not store the batteries close to a

Do not place the battery in direct
sunlight and do not use or store it in
motor vehicles in hot weather.
15 Store used batteries in the original
packaging and keep them away
from metal objects. Do not mix (up)
unpacked batteries! Otherwise this
may cause the battery to short-circuit,
resulting in damage, burns or even the

16 Remove batteries from the device if this
is not going to be used for a prolon-
ged period, unless it is to be used in
emergencies!
17 NEVER touch batteries which have
leaked without appropriate protection.
If the leaked liquid comes into contact
with the skin, you should rinse off this
area of the skin immediately under
running water. Make sure at all events
that your eyes and mouth do not come
into contact with the liquid. If they do,
seek medical advice immediately.
18 Clean the battery contacts and the
equivalent contacts in the device befo-
re inserting the batteries.
Residual Risks
This power tool has been construc-
ted in accordance with the latest
technology and the generally re-
cognised safety regulations. Never-
theless, it is possible that individual
residual risks may occur during
operation.
Electrical hazard if improper electrical
connection cables are used.
In addition, concealed residual risks
may be present in spite of all the
precautions that have been taken.
Residual risks can be minimised by
observing the „Safety instructions“ and
„Use in accordance with the designa-
ted purpose“, as well as the operating
instructions.
Do not put any unnecessary stresses
on the machine: excessive pressure
during sawing will quickly damage
the saw blade. This may result in a
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 273460 PTK 2000 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273460 PTK 2000 B2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info