745555
39
Zoom out
Zoom in
Previous page
1/204
Next page
39
GB IE
2 Maintenance and Servicing
Always remove the mains plug
when carrying out any adjustments
or maintenance work.
 
by various factors, including the
properties of the blades, the con-
dition of the saw blade and power
tool. If possible, use saw blades
that are designed to reduce the
noise level, service the power tool
and tool attachments regularly and
repair them if necessary to reduce
noise.
- Report any faults to the power tool,
safety devices or the tool attach-
ment as soon as they are disco-
vered to the person responsible for
safety.
3 Safe Working
Use the push stick or the handle
with push block to pass the workpi-
ece safely past the saw blade.
Make sure that the riving knife
is always used and that this is
correctly adjusted.
Use the upper blade guard and
adjust it correctly.
Use only saw blades whose maxi-
mum speed is not lower than the
maximum spindle speed of the tool
being used and which are suitable
for the material to be cut.
Do not create any rebates or
grooves unless a suitable protective
device, such as a tunnel guard, is
attached above the saw table.
Circular saws must not be used for
slotting (cutting grooves which end
in the workpiece).
When transporting the power
tool, use only the transport devices
supplied. Never use the guards for
handling or transporting the tool.
- During transport, make sure that
the top part of the saw blade is co-
vered, for example with the guard.
Ensure that the only spacer
washers and spindle rings which
are used are suitable for the purpo-
se stated by the manufacturer.
 

particles such as chips and cutting
residues.
Working position always to the
side of the saw blade.
Do not remove any cutting residues
or other parts of the workpiece
from the cutting area for as long
as the machine is running and the
sawing unit is not yet in the rest
position.
Secure long workpieces against
tilting at the end of the cutting
operation (e.g. unwinding stand or
roller stand).
Caution! long workpieces against
tilting at the end of the cutting
operation (e.g. unwinding stand or
roller stand).
Caution! Never remove any loose
splinters, chips or jammed pieces
of wood when the saw blade is
still running.
Always switch off the machine and
remove the plug before repairing
any faults or removing jammed
pieces of wood.
Always switch off the motor and
remove the plug before carrying
out any conversions or adjustment,
measurement and cleaning work.
Before switching on, check that
the spanners and adjustment tools
have been removed.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 273460 PTK 2000 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273460 PTK 2000 B2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info