745555
38
Zoom out
Zoom in
Previous page
1/204
Next page
38
GB IE
be carefully checked to determine
that it will operate properly and
perform its intended function.
Check whether the moving parts
are working properly and are not
becoming jammed or whether
parts are damaged. All parts must

conditions to ensure the proper
operation of the power tool.
The movable guard must not be
clamped when it is open.
A guard or other part that is dama-
ged should be properly repaired or
replaced by an authorized service
centre unless otherwise indicated
in this instruction manual.
Have defective switches replaced
by an authorized service centre.
Do not use any faulty or damaged
connection cables.
Do not use the tool if the switch
does not turn it on and off.
21 Warning!
The use of any accessory or attach-
ment other than one recommended
in this instruction manual may
present a risk of personal injury.
22 Have your tool repaired by a

This electric tool complies with
the relevant safety rules. Repairs
should only be carried out by qua-

parts, otherwise this may result in
considerable danger to the user.
ADDITIONAL SAFETY
INSTRUCTIONS
1 Safety Precautions
Warning! Do not use damaged,
cracked or deformed saw blades.
Replace a worn table insert.
Regrinding is not allowed.
Only use saw blades recommen-
ded by the manufacturer which
conform to EN 847-1. Warning!
When changing the saw blade
ensure that the cutting width is not
smaller and the main blade thick-
ness of the saw blade not greater
than the thickness of the riving
knife!
Make sure that a saw blade is
selected which is appropriate for
the material to be cut.
- Wear appropriate personal pro-
tective equipment. This includes:
Hearing protection to reduce the
risk of becoming hard of hearing,
breathing respirator to reduce the
risk of inhaling hazardous dust.
- Wear gloves when handling saw
blades and rough materials.
- Whenever practicable, saw blades
should be carried in a container.
Wear safety goggles. Any splin-
ters, chips and dusts which are
ejected from the device when it is
in operation may cause sight loss.
Connect the power tool to a dust
collection device when sawing
wood. Among other things, the
emission of dust is affected by the
type of material to be machined,
the importance of local deposition
(capture or source) and the correct

guide mechanisms.
- Do not use any saw blades made
of high-alloy high-speed steel
(HSS).
Always store the push stick or
push block in its holder on the
power tool when not in use.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 273460 PTK 2000 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273460 PTK 2000 B2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info