745555
40
Zoom out
Zoom in
Previous page
1/204
Next page
40
GB IE
Warning! During operation, this power


negatively affect active or passive medical
implants. In order to reduce the danger of
serious or fatal injuries, we recommend
that individuals who wear medical im-
plants should consult their doctor and the
manufacturer of the implant before opera-
ting the power tool.
SAFETY INSTRUCTIONS FOR
HANDLING SAW BLADES
1 Only use tools which you know how to
handle.
2 Pay attention to the maximum speed.
The maximum speed stated on the tool
being used must not be exceeded.
Keep within the speed range if one is

3 Note the direction of rotation of the
motor and saw blade.
4 Circular saw blades with cracks in
them must be taken out of service
(repair is not permitted).
5 Tools with visible cracks must not be
used.
6 Tools must be cleaned regularly.
7 Handle the tools used with care. It is
best to store these in their original pa-
ckaging or special containers. Always
wear protective gloves to improve
your grip and further reduce the risk of
injury.
8 Before using any of the tools, ensure
that all protective devices are correctly
attached.
9 Before use, ensure that all of the tools
-
rements of this power tool and are
properly attached.
10 The saw blade supplied should only
be used for sawing wood and never
for working metal.
Assembly and Attachment of Tools
and Tool Parts
a) Tools and tool bodies must be tighte-
ned in such a way that they cannot
become loose during operation.
b) Attachment bolts and nuts are to be

the manufacturer using appropriate
spanners etc.
c) Extending a spanner or tightening
with the help of hammer blows is not
permitted.
d) The tightening surfaces must be clea-
ned to remove any dirt, grease, oil
and water.
e) Tensioning bolts must be tightened in
accordance with the manufacturer‘s
instructions.
f) In order to adjust the borehole diame-
ter of circular saw blades to the spind-

inserted rings, e.g. rings which have
been pressed into place or which are
held in place by means of an adhesive
bond, may be used. The use of loose
rings is not permitted.
 
positioned parallel to one another.
Safety Instructions for Handling the
Laser
Caution: Laser radiation - Do not look
into the beam - Laser class 2
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 273460 PTK 2000 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273460 PTK 2000 B2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info