745555

Parkside IAN 273460 PTK 2000 B2 Manual

45
Zoom out
Zoom in
Previous page
1/204
Next page
45
GB IE
4. Release the two attachment bolts (30)
and insert the riving knife (4) between
the metal plate and the mount (see
Figure 18).
5. The distance between the saw blade
and riving knife (4) should be between
3 mm and max. 8 mm, (Figure 19).
6. Retighten the attachment bolts (30)
and mount the table insert (6) (see
Figure 17).
Mounting / dismounting
the Saw Blade Guard
(Figures 20/21)
1. Before initial assembly, the batteries
of the laser have to be inserted (see
Mounting the Riving Knife 1).
2. Dismantle the bolt with wing nut and
shim (27) of the saw blade guard (2).
Place the saw blade guard (2) from
the top onto the riving knife (4).
3. Mount the bolt with the wing nut and

the slot (28).
4. Do not overtighten the bolt (27). The
saw blade guard must be able to
move freely.
5. Place the suction hose (3) on the
suction adapter (16) and the suction
connector of the saw blade guard (2).
Connect a suitable woodchip extrac-
tion system to the suction adapter (16),
(Figure 21).
6. Dismantling is carried out in reverse
order. Caution! Before you start sa-
wing, the saw blade guard (2) has to
be lowered onto the item being sawn.
Replacing the Table Insert
(Figures 17 and 22)
1. If it is worn or damaged, the table in-
sert (6) has to be replaced, as otherwi-
se there is an increased risk of injury.
2. Remove the 3 countersunk screws (29).
3. Take out the worn table insert (6).
4. The new table insert is mounted in
reverse order.
Adjusting / mounting the
Riving Knife
(Figures 16-19)
Caution!
Remove the mains plug! The setting
of the saw blade (5) must be che-
cked whenever a blade has been
replaced.
1. Adjust the saw blade (5) to the max.
cutting depth, move to the 0° position
and lock in place.
2. Dismantle the saw blade guard (2)
3. Take out the table insert (6).
4. Loosen the attachment bolts (30).
5. Push the riving knife (4) upwards.
6. The distance between the saw blade
(5) and riving knife (4) should be max.
8 mm. (Figure 19)
7. Retighten the attachment bolts (30)
and mount the table insert (6).
8. Reattach the saw blade guard (2).
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 273460 PTK 2000 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273460 PTK 2000 B2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info