668497
35
Zoom out
Zoom in
Previous page
1/51
Next page
35
Example 1
The lift has been active for more then 20 days. (today it is Monday)
A user complains that the lift has stopped several times during movement on Wednesday and Friday.
When the error-log has been read out the display could show:
Note that the first error you read is the most recent one.
_ _ _ 2 2 2 _ _ 2 2 2 2_ _ _ _ _ _ _ _ -
or
_ _ 2 2 2 _ _ 2 2 2 2_ _ _ _ _ _ _ _ _-
Display-error 2 means that the swivel seat-switch was operated during controlling the lift.
In this case it is obvious that the problem has to be found in the wiring or the adjustment of the switch.
Example 2
There was a problem, but the user is not able to inform you.
When you read the error log you see the following errors.
5 2 _ _ 5 _ 5_ d _ _ 6 7 _ _ 0 _ _ 0 d-
Error 5 means that the lift was controlled on 2 locations at the same time.
Error 2 means that the swivel seat-switch was operated during controlling the lift.
Error 0 means that the armrest-switch was operated during controlling the lift.
Error F means that the safety footrest was controlled during controlling the lift
6 and 7 show to you that the lift had entered sleepmode, because the batteries were not charged for 1
hour.
In this case you should check if the control on the armrest goes back in middle position when released
or if one switches on the remote or in the armrest is function properly.
When for example the remote is not mounted properly, it could happen that a button stays controlled
while is has been released.
Also check the safety plate footrest and safety switch footrest left.
The error-log shows that 4 or 5 and probably 10 or 11 days ago, this was a reason why the chairlift
was stopped.
Does the plate of the footrest move back when it is controlled?
Note that also the user can have caused this, because there was an object on the stairs.
Display error 2 and 0 could be a mistake in operating by the costumer.
To be sure, you can check the function of the armrest-switch and swivelseat-switch.
The 6 en 7 indicates that the chairlift had entered the sleepmode.
Was there a power-failure on the 230~net (mains voltage) or …..?
To be sure check the wiring of the charge-point.
Please note that the error-log makes and sees no difference in failure or mistake in controlling
by the user.
It only is a tool to help you find the reason, why the chairlift did not work.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otolift One at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otolift One in the language / languages: English as an attachment in your email.

The manual is 4,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info