668497
34
Zoom out
Zoom in
Previous page
1/51
Next page
34
If for example the display shows 2, this means that the swivelseat-switch is controlled, or that the
wiring to this switch is defect.
In combination with the detail drawing of the wiring (attachment 300901_connect) it should be easy to
solve the problem, if the problem is related to the wiring.
All Exx errors are shown blinking. (for example Error 12 will shown as E, 1, 2, E, 1, 2, E, 1, 2 etc.)
Most Exx errors will generate a fast beep (5Hz).
Exception for error 13,18 and error 97 and 99. These errors does not generate a fast beep.
12.1.2 LED’s on the PCB
There are 4 LED’s mounted on the PCB.
The 3 LED’s left below are mounted for indication of the status of the 375 mA SMD fuse, contact of
overspeed governor (catch) and limitswitch/jumper. (LED 1, 2 & 3).
Also when the flatcable or Board to Board cable (BtB) is forgotten, these 3 Led’s will not light.
The LED near the display shows the status of the PCB. (LED 4)
LED 1,2 & 3 on = Fuse 375 mA (F1) safetyline & contact overspeed governor (catch) and limitswitch (limit) OK.
LED 1,2 & 3 off = Fuse 375 mA (F1) safetyline defect/ sleepmode/ shortcircuit x10-3 to gnd/ flatcable / BTB not mounted
LED 2 & 3 off = Limitswitch (limit) is operated / jumper as interconnection not connected.
LED 2 off = Contact overspeed governor (catch) is operated.
LED 4 on = OK
LED 4 off = 5A fuse defect/ no battery-voltage
LED 4 flashes = Chairlift is in sleepmode
12.1.3 Error-log
The PCB stores the errors in its memory.
By using the buttons left and right on the servicebox you can read out the error-log.
Facts & functions of error-log
- Control right => read the stored errors backwards
- Control left => start at latest stored error
- Control left for 10 sec. => delete error-log
- Every 24 hours (when not in sleepmode) the log stores an underscore
- Errors are only stored when the lift is controlled by armrest left/right or remote up/down.
- When the lift has not moved, the same error will be stored once.
- When the lift has moved, the same error can be stored more then once.
- Maximum of 20 errors or days can be stored.
- The end of the error-log is shown as a minus
Please note that the underscore is not real time. The system only stores the underscore when the
system has been active for 24 hours.
LED
1,2,&3
Led 4
1
2
3
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otolift One at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otolift One in the language / languages: English as an attachment in your email.

The manual is 4,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info