Manual Nuk Eco Control Video Display 550VD - 10749102 (page 20 of 36) (English)

803238

Zoom out

Zoom in

1/36

If a setting has already been made, the

active setting will be shown in green. In

addition, all the activated functions are

shown in the status bar at the top of the

screen.

4. Use the 25 or 28 button to move the

star in front of the required setting.

5H, 4H, 3H, 2H, 1H: The timer is

activated and the alarm will be signalled

after the set time.

OFF: the reminder function is off.

5. Press the button 26 to confirm your

setting.

The setting will be stored, the menu will

be closed, and the parent unit will return

directly to monitoring mode.

If activated, the corresponding symbol

will be shown in the status bar (see

"3.3 Overview of status bar indicators"

on page 47).

Note: After 15 seconds without any input

from you, the menu will be closed with the

settings unchanged and the parent unit will

return directly to monitoring mode.

When the set number of hours has

elapsed, an audible alarm is issued

and the corresponding warning

symbol appears in the middle of the screen.

6. To switch the alarm off, press any button.

7. To disable the reminder function before

the alarm:

– follow steps 1 to 5 described above,

select the OFF setting, and then press

the button 26

6.7 Adding and selecting a

camera, and activating

patrol mode

This NUK baby monitor can have up to four

baby units (cameras) connected at the same

time. This allows you to monitor more than

one room, or monitor the same room from

different perspectives. You can either switch

from one camera to the next yourself, or

activate the patrol mode. Patrol mode

automatically switches from one camera to

the next every 10 seconds. First, you will

need to add the cameras to the parent unit.

Additional baby units can be obtained from

www.nuk.de, for example.

Adding a camera

To add a camera/baby unit, proceed as

follows:

1. First make certain the parent unit is near

enough to the new baby unit you wish to

add (within range).

Move to a location that you can be

confident is within range of the baby unit

so that the parent unit can receive the

connection link signal and there are no

communication problems.

2. Make sure the parent unit and the new

baby unit are switched on.

3. Press the button 26.

The menu bar with the main menu will

appear at the bottom of the screen.

4. Use the 24 or 27 button to

select the Camera menu.

The selected symbol will be shown in red.

5. Press the button 26 to view the

submenu.

6. Use the 25 or 28 button to move the

star in front of the required setting.

x : delete camera

+ : add camera

7. To add a camera, use the 25 or

28 button to select the Add

camera submenu.

8. Press the button 26 to view the next

submenu.

An overview appears showing four

camera symbols. The available camera

numbers for your new camera are shown

in black.

Camera numbers already in use are

shown in green.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Video Display 550VD - 10749102 in the language / languages: English as an attachment in your email.

The manual is 0.54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nuk Eco Control Video Display 550VD - 10749102 Manual

Product: