803238

Nuk Eco Control Video Display 550VD - 10749102 Manual

19
Zoom out
Zoom in
Previous page
1/36
Next page
57
The setting will be stored, the menu will
be closed, and the parent unit will return
directly to monitoring mode.
Note: After 15 seconds without any input
from you, the menu will be closed with the
settings unchanged and the parent unit will
return directly to monitoring mode.
6.5 Switching the nightlight
on and off
The nightlight function provides a soft dim
light in baby's room.
Note: Alternatively, you can switch the
nightlight on and off from the baby unit itself
(see "5.5 Nightlight" on page 54).
1. Press the button 26.
The menu bar with the main menu will
appear at the bottom of the screen.
2. Use the 24 or 27 button to
select the Nightlight menu.
The selected symbol will be shown in red.
3. Press the button 26 to view the
submenu.
If a setting has already been made, either
on the baby unit on the parent unit, the
active setting will be shown in green. In
addition, all the activated functions are
shown in the status bar at the top of the
screen.
4. Use the 25 or 28 button to move the
star in front of the required setting.
60, 40, 20: nightlight is on, but will
automatically switch off after the set
number of minutes.
ON: nightlight is permanently on.
OFF: nightlight is off.
5. Press the button 26 to confirm your
setting.
The setting will be stored, the menu will
be closed, and the parent unit will return
directly to monitoring mode.
If activated, the corresponding symbol
will be shown in the status bar (see
"3.3 Overview of status bar indicators"
on page 47).
Note: After 15 seconds without any input
from you, the menu will be closed with the
settings unchanged and the parent unit will
return directly to monitoring mode.
6. To switch the nightlight off:
– follow steps 1 to 5 described above,
select the OFF setting, and then press
the button 26
– alternatively, press the Nightlight on/
off button 13 on the baby unit.
Attention! Please note that you could wake
your baby if you activate the night light while
your baby is asleep and Eco-Mode is active.
Eco-mode is active if:
– LED 20 is flashing
– the corresponding symbol is shown in
the status bar (see "3.3 Overview of
status bar indicators" on page 47)
– video transmission is deactivated
If you switch the nightlight on regardless,
Eco-mode will automatically be deactivated.
6.6 Activating the reminder
function
The baby monitor has a timer with an alarm
function, which can be set to remind you of
baby's next feed time or wake-up time.
1. Press the button 26.
The menu bar with the main menu will
appear at the bottom of the screen.
2. Use the 24 or 27 button to
select the Feed time reminder
menu.
The selected symbol will be shown in red.
3. Press the button 26 to view the
submenu.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk Eco Control Video Display 550VD - 10749102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Video Display 550VD - 10749102 in the language / languages: English as an attachment in your email.

The manual is 0.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info