Manual Nuk Eco Control Video Display 550VD - 10749102 (page 21 of 36) (English)

803238

Zoom out

Zoom in

1/36

If you have already added a second

camera, you can also select the patrol

mode option in this menu.

9. Use the 25 or 28 button to move the

star in front of the available camera

number you wish to use for the new

camera (black symbol).

At this point, you can still exit the

submenu by pressing the button 27.

The submenu will close and you will be

returned to the previous submenu.

However, to continue with your settings,

continue with the next step.

10.Press the button 26to confirm your

selection.

You will be asked to confirm

your selection again.

11.Use the 24 or 27

button to select "YES" and

press the button 26 to

confirm.

The screen of the parent unit will

show that the device is ready to

set up the connection and is

searching for the connection link signal.

12.Insert a bent paper clip or similar into the

button recess and press the recessed

button 9 on the baby unit to activate the

connection link signal.

The baby unit will then transmit the

connection link signal for the parent unit

to find.

As soon as the connection with

the new camera has been

successfully set up, you will hear

a beep and the appropriate symbol will

appear on the screen.

The menu on the parent unit will be

closed and video transmission from the

new camera/baby unit will be shown. The

new camera/baby unit is displayed in the

status bar with a camera symbol and

number.

Notes:

– In order to be able to use the patrol

mode (see "Patrol mode“ on page61),

at least two baby units/cameras must

be connected to the parent unit.

– After 15 seconds without any input from

you, the menu will be closed with the

settings unchanged and the parent unit

will return directly to monitoring mode.

Connection setup failed

If the connection setup failed, the

screen will remain white and a

corresponding warning symbol will

appear after a few seconds. You will also

hear a beep.

The parent unit will then switch back to the

video transmission from the previously

active camera/baby unit.

13.Follow steps 1 to 12 described above

and try again.

Deleting a camera

You can operate up to four baby units

(cameras) connected to the same parent

unit, but only delete three of these. The last

connected camera/baby unit remains

connected under the same camera number

and cannot be deleted.

A camera/baby unit can be deleted even if it

is not actively connected to the parent unit

at the time.

To delete or remove a camera/baby unit

from the parent unit, proceed as follows:

1. Press the button 26.

The menu bar with the main menu will

appear at the bottom of the screen.

2. Use the 24 or 27 button to

select the Camera menu.

The selected symbol will be shown in red.

3. Press the button 26 to view the

submenu.

4. Use the 25 or 28 button to move the

star in front of the required setting.

x : delete camera

+ : add camera

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Video Display 550VD - 10749102 in the language / languages: English as an attachment in your email.

The manual is 0.54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nuk Eco Control Video Display 550VD - 10749102 Manual

Product: