803238

Nuk Eco Control Video Display 550VD - 10749102 Manual

22
Zoom out
Zoom in
Previous page
1/36
Next page
60
5. To delete a camera, use the 25
or 28 button to select the Delete
camera submenu.
6. Press the button 26 to view the next
submenu.
An overview appears showing the
registered cameras/baby units.
7. Use the 25 or 28 button to move the
star in front of the camera you wish to
delete.
At this point, you can still exit the
submenu by pressing the button 27.
The submenu will close and you will be
returned to the previous submenu.
However, to continue with your settings,
continue with the next step.
8. Press the button 26to confirm your
selection.
You will be asked to confirm
your selection again.
9. Use the 24 or 27
button to select "YES" and
press the button 26 to
confirm.
The screen of the parent unit will
show that the camera is being
deleted.
As soon as the camera has been
successfully deleted, you will hear
a beep and the appropriate
symbol will appear on the screen.
The menu on the parent unit will be
closed and video transmission from the
active camera/baby unit will be shown.
If you delete the camera/baby unit that is
currently active, the parent unit will show
the video transmission from camera/baby
unit 1.
Note: After 15 seconds without any input
from you, the menu will be closed with the
settings unchanged and the parent unit will
return directly to monitoring mode.
Delete failed
If the camera delete attempt fails, an
appropriate warning symbol
appears. You will also hear a beep.
The parent unit will then switch back to the
video transmission from the previously
active camera/baby unit.
10.Follow steps 1 to 9 described above and
try again.
Manually switching between
cameras
If more than one camera/baby unit is
registered on the parent unit, you can select
one of these cameras for continuous
monitoring.
1. Press the button 26.
The menu bar with the main menu will
appear at the bottom of the screen.
2. Use the 24 or 27 button to
select the Camera menu.
The selected symbol will be shown in red.
3. Press the button 26 to view the
submenu.
4. Use the 25 or 28 button to
move the star in front of the "Add
camera" setting.
5. Press the button 26 to view the next
submenu.
An overview appears showing camera
symbols. Camera numbers under which a
camera/baby unit is registered are shown
in green.
6. Use the 25 or 28 button to move the
star in front of the camera you wish to
use for continuous monitoring.
At this point, you can still exit the
submenu by pressing the button 27.
The submenu will close and you will be
returned to the previous submenu.
However, to continue with your settings,
continue with the next step.
7. Press the button 26to confirm your
selection.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk Eco Control Video Display 550VD - 10749102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Video Display 550VD - 10749102 in the language / languages: English as an attachment in your email.

The manual is 0.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info