803238
18
Zoom out
Zoom in
Previous page
1/36
Next page
56
Notes:
If the baby unit 1 is in Eco-Mode and the
parent unit moves out of range, the
connection indicator 20 will light up red.
You will also hear a beep every 30
seconds.
A red warning symbol will appear
on the screen.
As soon as the parent unit 17 comes
back into range and the reason for the
interrupted connection is eliminated, the
connection indicator 20 lights up green
and the units are able to communicate
again.
Noise level indicators 22
The noise level indicators 22 above the
screen, consisting of four green LEDs and
one red LED, indicate the level of sound in
baby's room. They react differently,
according to the set VOX level (sensitivity).
The more LEDs light up, the louder the
sounds in baby's room.
Attention! The noise level indicators are
switched off while the lullabies are playing,
because the device cannot distinguish
between the lullabies and baby sounds. You
will also be able to hear any sounds baby
makes in the background while the lullabies
are playing (see "6.11 Lullabies" on
page 67).
6.3 Using the main menu
The main menu at the bottom of the screen
allows you to switch the available functions
on or off or change settings:
1. The main menu appears when you press
the button 26.
2. Use the 24 or 27 button to select
a menu item.
The selected menu item will be shown in
red.
3. Press the button 26 again to open the
menu item and view the possible settings
or submenus.
4. Use the 25 or 28 button to select a
setting or a submenu item.
The selected item is marked with a
green asterisk.
5. Press the button 26 to confirm
the setting you have selected or open the
selected submenu.
6. You can press the button 27 to exit
the current submenu and return to the
previous submenu.
7. To close the opened menu:
wait 15 seconds without pressing any
buttons, or
confirm a setting you have selected by
pressing the button , or
select the EXIT option in the main
menu and confirm this by pressing the
button 26.
6.4 Screen brightness
You can adjust the screen brightness and
the brightness of the video to suit the
prevailing light conditions. In very light
conditions, you should set a higher screen
brightness to improve visibility. In low light,
you might feel uncomfortable with too bright
a screen. Adjust the screen brightness lower
in this case.
1. Press the button 26.
The menu bar with the main menu will
appear at the bottom of the screen.
2. Use the 24 or 27 button to
select the Brightness menu.
The selected symbol will be shown in red.
3. Press the button 26 to view the
submenu.
4. Use the 25 or 28 button to select
the brightness you require.
The more bars you can see, the higher
the screen brightness. You have a choice
of 5 levels.
5. Press the button 26 to confirm your
setting.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk Eco Control Video Display 550VD - 10749102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Video Display 550VD - 10749102 in the language / languages: English as an attachment in your email.

The manual is 0.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info