Manual Nuk Eco Control Video Display 550VD - 10749102 (page 16 of 36) (English)

803238

Zoom out

Zoom in

1/36

5.3 Setting the volume

We recommend switching the lullabies on

(see "5.4 Playing the lullabies" on page 54)

for setting the volume on the baby unit, as

playing them can help you decide which of

the five possible volume settings is best

suited to your purpose.

1. To activate the lullabies on the baby unit

1, press the button Lullabies on/off 12.

Note: The lullabies can also be activated

from the parent unit 17 (see

"6.11 Lullabies" on page 67).

2. Use the VOL +/- buttons 11 to set the

volume at which baby will hear the

lullabies or your voice.

5.4 Playing the lullabies

This NUK babyphone has four especially

composed lullabies and soothing natural

sounds to help you soothe your baby and

lull it to sleep.

1. To activate the lullabies on the baby unit 1,

press the Lullabies on/off button 12.

Note: The lullabies can also be activated

from the parent unit 17 (see

"6.11 Lullabies" on page 67).

2. You can change the current song by

holding down the Lullabies on/off

button 12. This automatically goes on to

the next song.

Note: If the timer function has been

activated on the parent unit (see "Activating

the timer“ on page69), and you change

from one lullaby to the next directly on the

baby unit, the timer will be restarted. If the

timer function has not been activated, the

lullaby will continue to be played repeatedly

until switched off by you on the parent unit

or the baby unit (see “Switching the lullabies

off“ on page68).

5.5 Nightlight

The baby unit’s soft nightlight can help your

baby to get its bearings in the dark room,

which it may find soothing. The nightlight

remains on until it is switched off by you or

the timer function (see "6.5 Switching the

nightlight on and off" on page 57).

1. You can switch the nightlight on or off on

the baby unit by briefly pressing the

button Nightlight on/off 13.

2. You can switch the nightlight on and off on

the parent unit (see "6.5 Switching the

nightlight on and off" on page 57).

5.6 Registering remote units

on the parent unit

The parent unit and the baby unit included

in the same delivery package will normally

connect automatically once they are

switched on.

However, you can operate up to 4 baby

units (cameras) connected to the same

parent unit. Additional baby units can be

obtained from www.nuk.de, for example.

To add one or more cameras/baby units,

follow the instructions in section

"6.7Adding and selecting a camera, and

activating patrol mode" on page 58.

5.7 Measuring the room

temperature

The baby unit has an integrated temperature

sensor which is not visible from the outside.

This sensor measures the temperature in

around the baby unit, which is displayed

and continually updated on the parent

monitor.

Notes: To avoid affecting the temperature

measurement:

– do not cover the baby unit

– do not place the baby unit near a

heater or cold surfaces

– do not place the baby unit in direct

sunlight.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Video Display 550VD - 10749102 in the language / languages: English as an attachment in your email.

The manual is 0.54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nuk Eco Control Video Display 550VD - 10749102 Manual

Product: