803238

Nuk Eco Control Video Display 550VD - 10749102 Manual

14
Zoom out
Zoom in
Previous page
1/36
Next page
52
Indicators
The following information is shown in the
status bar of the parent unit:
Notes:
– Charging the battery for the very first
time takes about 10 hours.
– Subsequently recharging the depleted
battery takes about 6 hours.
– With a fully charged battery, you can
operate the parent unit for up to 8
hours.
The time needed to recharge the battery and
the operating time both depend on how
heavily the parent unit is used:
– The battery can normally be recharged
in about 6 hours, but it will take longer
if the device is switched on at the same
time.
– Similarly, the operating time of up to 8
hours will be reduced if you use the
talk-back function or choose a high
volume setting.
– The operating time can be increased, for
example, if audio monitoring is activated
(see "6.9 Switching between audio and
video monitoring" on page 63), if your
baby has a particularly restful sleep, or if
the "LCD Auto Off" option for the screen
is switched on (see "Switching between
audio and video monitoring“ on
page63).
4.5 Eco-Mode and
Full-Eco-Control
This baby monitor has an Eco-Mode
function that not only saves power but also
minimises the high-frequency radio waves in
the nursery.
In this mode, there is only limited
transmission between the baby unit and the
parent unit, although the Full-Eco-Control
function ensures that both units remain
connected the whole time. If the connection
is interrupted in Eco-Mode, this is
immediately indicated on the parent unit.
The device automatically deactivates Eco-
Mode and transmits sound and video again
as soon as your baby makes a sound that
exceeds your set sound limit (VOX levels 1 -
4).
Activating Eco-Mode
Eco-Mode can only be activated at VOX
levels 1, 2, 3, and 4 (see "6.8 Setting the
VOX sensitivity level" on page 62). Eco-
Mode is activated automatically as soon as
Battery power
Battery is full and LED 21 is lit
up green.
Battery is half-full and LED 21
is lit up green.
Battery is almost empty.
Depending on how it is being
used, the device will automati-
cally switch off within the next
15-20 minutes. We therefore
recommend that you connect
the device to mains power in
order to recharge the battery.
LED 21 is lit up green.
Battery symbol flashes red.
This means that the battery is
empty and the device will
switch off within a very short
time. LED 21 flashes and
device emits a warning beep
every 60 seconds. In addition, a
warning appears in the middle
of the screen.
Bars run across the display
LED 21 flashes green:
The device is connected to mains power
and the battery is being recharged.
The animation stops as soon as the battery
is fully charged and LED 21 no longer
flashes.
Parent unit is connected to
mains power, but no battery is
inserted. LED 21 is lit up green.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk Eco Control Video Display 550VD - 10749102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Video Display 550VD - 10749102 in the language / languages: English as an attachment in your email.

The manual is 0.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info